Waste Tire Recycling Machine
Tyre crushing machine
Waste Rubber equipment consist of the decomposition of waste tire facilities, mill group, screening magnetic powder delivery unit. Through the tyre bead ring cutting off machine, tyre strips cutting machine and the tyre rim cutting machine, first tyre processed into 3.5 cm square pieces; Then type on the rubber mill group XKP400/450/560 blocks havebroken ground wire mixed powder, then powder Magnetic conveyor type unit screening will be completely separate wire and tire rubber. By belt conveyor through two sieve bedsfilter out the fine material via magnetic roller, magnetic separation of the wire, the system of 10-degree head -40 mesh fine powder purity (fineness optional). Below standardmesh fineness of powder materials by conveyor to return block grinding mill again, this cycle of advanced grinding technology, without any chemicals, no gas, no water, lowoperating costs. Magnetic effect of 99.9% of steel wire to XKP450 type, for example, the total installed power 80KW, 1 ton per tire processing power around 200 degrees, output200-400 kg per hour (to obtain powder of different fineness, yield also different), is the use of steel wire tire rubber powder produced the best equipment.
Waste Tire Recycling Machine offered by Zhangjiagang Huifeng Rubber Co. Ltd.
Waste Tire Recycling Machine
The amount of scrap tires is growing worldwide and therefore the necessity to recycle is increasing.
Scrap tire recycling, as it is commonly known, means not only the replacement of fossil fuels but also the separation of valuable materials such as rubber, steel and textiles and reintroduce them into the raw material cycle. For this application ZHENYA offers complete recycling systems from one source.
To start the recycling process, scrap tires have to be cut into chunks. High capacity shredders, type ZPS are used for this application.
Running in a circle with disc screens, these high capacity machines produce clean cut chunks, size 50 x 50 mm, a preferred and easy to dose bulk material for thermal reuse.
The scrap tires are cut to chunk sizes, 150×150 mm as feed material for a granulation step for the production of rubber granules.
Grinders, loosen the rubber-steel-textile compound. The loosened components are separated by means of magnetic-, air- and screening technology. The textile fluff is very well suited as insulation material. The separated steel wires have a purity of > 97 percent and can be lucratively sold.
The rubber granules are, in a third step, pulverized in the pulverizer to desired powder size and are further freed from steel and textile.
Typical areas of application for rubber granules from scrap tires are the construction of sports arenas such as running tracks and tennis courts, flexible flooring for improved protection from falling on playgrounds, road construction as an additive to asphalt, for decreasing ruts and road noise, for the production of moulded parts for industries and households, the roduction of mats for heat-, noise- and vibration damping in vehicles and at workstations etc.
Zhenya process sets the standard for high capacity, low operating costs and an excellent return on investment.
More questions, just contact us, we will supply you speciallized support and solutions
Waste Tire Recycling Machine offered by Jiangyin Zhenya Machinery Co. Ltd.