Tire Pyrolysis System (Tire Refining)

HE-EP pyrolysis technology integrated features:

1. Technologically advanced: A small investment; Small footprint

2. Plant construction land 300m2 ~ 2500m2;

3. Low running costs: The high level of automation equipment, daily classes 3 to 6 people;

4. Short cycle: The standardization of building-block design, in 20 ~ 40 days to complete the installation, commissioning, turn-key operation (not including plant construction time);

5. Refining a wide range of raw materials, inexhaustible;

6. Advanced furnace room, installation, demolition fast, easy maintenance;

7. Equipment technology advanced, fast pyrolysis, the oil is high, all-weather continuous production, without having to wait for furnace cooling, you can tap, feed, improved production efficiency. The use of electricclosed quickly, sealing, security.

8. Using patented catalyst cracking, cracking fast Chunqing oil. Oil collection system with multi-stage cooling system to ensure adequate oil and gas cooling rates and higher oil;

9. Security, closed pyrolysis reactor, set combustion, heat decomposition for the integration of design, high-temperature combustion gas channel in the composite cyclone rotary heating, so that a significant increase heating efficiency, reduce heat and improve the efficiency of the endothermic pyrolysis reactor, reduce the cost of consumption of combustion is the core technology of the system.

Resources

10. Loop of the economy: Round-the-clock production equipment, closed-end clean running oil-producing fast, good oil quality, save fuel, the combustion by a pyrolysis oil, pure oil quality, purity is close to diesel oil, no smell, the burning of high value; General integrated waste oil rate of 25 ~ 50%; Tires, waste rubber oil rate of 35 ~ 40%; Waste oil and other oil rates up to 70 ~ 85%; By secondary cracking of diesel oil, high purity, after pyrolysis in an oil based on the combustion of oil rate of 85 ~ 90%, after chemical treatment, up to the standard 0 # diesel oil, the oil power, and resistant to combustion, the engine without any side effects.

11. Energy reduction: In the pyrolysis process, the oil and gas will be produced for a large number of normal temperature and pressure can not be liquefied combustible gas (methane-butane), which treated gas through the gas nozzle is designed with the full combustion in the furnace, a large amount of heat, not only significantly save energy, but also greatly improved the production efficiency. Combustion of soot, smoke and dust treatment system by the discharge, no secondary pollution, emissions to meet national standards.

12. Provide for cracking waste rubber, waste plastics, tires and all kinds of waste lubricating oil hydrogenation transfer agents, catalysts, depigmenting agents, sweetening agents, can be refined 90 # gasoline, 0 # diesel oil were to reach the national standard.

13. The whole process of computer control of materials, recycling of water temperature, reactor temperature, feed, spoil disposal, transportation of oil products, as well as the process of failure alarm systems, real-time detection, control and stable operation. Significantly reduce the manual operations, improve security, reduce the auxiliary time, the protection of the safe operation, increasing productivity.