Sprue Picker Robot for 50-100 Ton Plastic Molding Machine (TYP-550)
Configuration and Usage of swing sprue picker:
1. The swing sprue picker applicable for horizontal injection machine of 50T to 100T to take out the final and subordinate products from two-plate mold
2. The swing sprue picker of one-stage arm with vertical trip of 550 mm
3. The swing sprue picker to increase production efficiency, accuracy of production control and operation safety, decrease defective ratio and human resource cost
Structure and function of swing sprue picker:
1. Left and right rotary mechanism of the swing sprue picker for easy placement and adjustment without changer and magnetic reed switch
2. Fixture rotary mechanism to place final and subordinate products within rotary degree of 90
3. Release the fixed handle to change the mould and the efficiency increased
4. The swing sprue picker made of aluminum alloy, precisely cast and processed, stable and durable at high-speed moving
6. Sidle and vertical arms of the swing sprue picker made of imported linear pulley and aluminum alloy beam, and linear bearing of high-performance steel for fast speed, high efficiency, high precision and lasting usage
Humanization design of swing sprue picker:
1. Interactive operation of control system, Chinese or English language change, easy operation and learning
2.8 standard programs built-in the swing sprue picker, 12 teaching programs to be saved, multiple production requirements and forms to be fully satisfied
3. Memory function for 50 types of moulds, mould changing reset and adjustment
4. Automatic fault detection and record for easy troubleshooting
5. Display of all input and output contacts on the operation interface of the swing sprue picker for easy and quick maintenance
6. Signals of safety door, mould opened, mould opening allowed, needle and final product examination displayed on LED
7. Back-up output contact to be connected with automation equipment, such as conveyor, taken up platform and so on
8. Convenient time-delay and counts revision at automatic running
9. CE model with standard connector on demand to be consistent with standards of EROMAP 12 or 67 and SPI
10. Placement safety on demand for automation in entire factory.
MODEL |
POWER CAPACITY (KVA) |
POWER SUPPLY |
WORKING PRESSURE |
DRIVING WAY |
SWING ANGLE |
FIXTURE ROTATION ANGLE |
APPLIED INJECTION MACHINE (TON) |
TYP-550V |
0.2 |
1 PH AC 220-240V ±10V 50/60HZ |
5 Kgf/cm2 0.49 Mpa |
pneumatic |
60°-90° |
90° |
50-100 |
MODEL |
VERTICAL STROKE (MM) |
CROSSWISE STROKE (MM) |
AIR CONSUMPTION (NI/CYCLE) |
MAX. LOADING (KG) |
TAKEN OUT TIME (SEC) |
SINGLE CYCLE TIME (SEC) |
NET WEIGHT (KG) |
TYP-550V |
550 |
120 |
2.3 |
3 |
1 |
4.2 |
35 |
Sprue Picker Robot for 50-100 Ton Plastic Molding Machine (TYP-550) offered by Dong Guan TongYi Plastics Machinery Co. Ltd.