Servo Injection Molding Machine
@ High energy saving
In an ideal working state, the machine can save energy 20%-80%, comparing with conventional.
Injection molding machine.
@ Better molding stability
Comparing with conventional injection molding machines, the machine repeatability is greatly.
Improved due to servo motor close-loop control.
@ Quick response
The response time of servo motor is only 0.05 second.
@ Quiet & low noise
The machine runs with low noise, and will be much quiet in a low speed.
@ Reliable holding pressure
The time for pressure holding of the machine will be much longer and more steady, comparing with other electric injection molding machines.
@ Oil temperature rise slowly
Servo motor proportionally delivers hydraulic oil upon user’s needs. It can prevent unnecessary heat being generated, in some cases even oil cooling is not required.
FL160 |
||||
INJECTION UNIT |
||||
A |
B |
C |
||
Screw Diameter |
mm |
42 |
45 |
45 |
Screw L/D Ratio |
22.5 |
21 |
23.2 |
|
Shot Volume(Theoretical) |
cm 3 |
312 |
358 |
412 |
Injection Weight(PS) |
g |
280 |
322 |
370 |
Injection Pressure |
Mpa |
203 |
177 |
240 |
Screw Stroke |
mm |
245 |
||
Screw Speed |
r/min |
200 |
||
CLAMPING UNIT |
||||
Clamp Tonnage |
KN |
1600 |
||
Toggle Stroke |
mm |
430 |
||
Space Between Tie Bars |
mm |
460×460 |
||
Max.Mold Height |
mm |
500 |
||
Min.Mold Height |
mm |
180 |
||
Ejector Stroke |
mm |
130 |
||
Ejector Tonnage |
KN |
45 |
||
Ejector Number |
pc |
5 |
||
OTHERS |
||||
Max.Pump Pressure |
Mpa |
16 |
||
Pump Motor Power |
KW |
15 |
||
Heater Power |
KW |
9.5 |
||
Machine Dimensiomn(L×W×H) |
m |
5×1.35×1.9 |
||
Machine Weight |
t |
5 |
||
Oil Tank Capacity |
L |
280 |
Servo Injection Molding Machine offered by Ningbo Beilun Fully Machinery Co. Ltd.