Product Description Jiangyin zhenya machinery Co., Ltd. And the Hong Kong heng-fu are committed to the development of international co-operation between the technology and urban living garbage garbage fuel oil refining equipment of the professional environmental protection company. Over the years, the company combined with the United States, Canada and European countries combustible garbage cities [...]

Manufacturer/Supplier: Jiangyin Zhenya Machinery Co. Ltd.

Product Description The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products. The machine is in frame structure with below pressing form (upwards). Besides, we can design and manufacture all kinds of high quality particular machinery according to the demand of our clients.

Manufacturer/Supplier: Qingdao Judong Industry Co. Ltd.

Product Description Tyre crushing machine Waste Rubber equipment consist of the decomposition of waste tire facilities, mill group, screening magnetic powder delivery unit. Through the tyre bead ring cutting off machine, tyre strips cutting machine and the tyre rim cutting machine, first tyre processed into 3.5 cm square pieces; Then type on the rubber mill [...]

Manufacturer/Supplier: Zhangjiagang Huifeng Rubber Co. Ltd.

Product Description Tire crusher is to smash 50mm rubber blocks into 25mm at the normal temperature. Power: 40KW Capacity: 1.7ton/h Advantage of tire crusher: Hard alloy is welded on the cutting blade to make it rigid and wearable. High efficiency, low noise, small size, light weight, long service life. Easy shaft replacement and maintenance. Main [...]

Manufacturer/Supplier: Hubei Eguard Environmental Equipment Co. Ltd.

Product Description Technical data of pen roll mill, rubber machinery, open roll mill: Features: 1) The mixer is mainly applicable for both natural and synthetic rubber. Processing: Thermal mixing of batches and finish squashing. 2) Also it can be used for plastic industry and pigment industry as subsidiary application (PVC). Specification Type Roller diaX length(MM) [...]

Manufacturer/Supplier: Shanghai Double Elephants Rubber & Plastic Machinery Co. Ltd.

Product Description Rubber tiles is a kind of recycled rubber as a raw material, a new type of surface decoration materials though a high temperature and appropriate pressure. Rubber tiles are colored by the post-treated rubber particles coated with adhesive mixture, and then pressed. Mainly used for outdoor, can also be used indoors. Rubber tiles [...]

Manufacturer/Supplier: Qingdao Xinchengyiming Rubber Machinery Co. Ltd.

Product Description XLB / DZ Series Rubber Machine is advanced rubber molding press. Especially, it is suitable for the rubber products of complex shapes, exhausting difficultly, difficult to molding and also for rubber products which are easy to produce bubble. Features: 1. Using screen to show process parameters. Heating plate temperature control adopts computer PID [...]

Manufacturer/Supplier: Ningbo Chap Machinery Manufacture Co. Ltd.

Product Description B (Bag O matic) type double mould tyre shaping and curing press is suitable for the vulcanization of all-steel heavy-duty radial tyre, semi-radial tyre and nylon bias tyre with one set of additional post curing inflator. Sizes of the machine: LL-B1145X2, LL-B1310X2, LL-B1525X2, LL-B1640X2 MODEL LL-B1640X2 LL-B1525X2 LL-B1310X2 LL-B1220X2 LL-B1145X2 LL-B1050X2 Steam dome [...]

Manufacturer/Supplier: Qingdao Doublestar Rubber & Plastic Machinery Co. Ltd.

Product Description Ttire End cutting machine is self-developed by our factory according to the majority user`s requirements. It is mainly applied to the tire factory on the tire section cutting. The machine is controlled by NC system, we use dual-blade in cutting process, reduce the vibration in sampling, also can improve Section sawing efficiency. It [...]

Manufacturer/Supplier: Nanjing Jixiang Mechanical Equipment Co. Ltd.

Product Description Hydraulically remove the inner steel wire from the tire bead, we have two models: Single side one and double side one. After this procession, the tires can be cut and shredded without damaging the cutting machine and shredder.

Manufacturer/Supplier: Jiangyin Zhenya Machinery Co. Ltd.

Product Description The machine is used to produce strip precured tread for renovation of all kinds of tires. And is suitable for cold renovation procedure of tires. We can supply press with platen size 4100*350, 4600*540, 6600*510, 4000*700, 3800*360 5500*360, 3800*700, total pressure 400t, 650t, 750t, 900t, 1100t, and other models according to the requirements [...]

Manufacturer/Supplier: Qingdao Biz International Trade Co. Ltd.

Product Description Professional manufacturer of tyre vulcanizing press. 1. Vulcanizing all kinds of tyres for different application. 2. Beautiful structure and high cost performance. 3. Standard techenical data for any usage. 4. Competitive price with good quality. 5. Well accepted and enjoyed by abroad and domestic clients. Type Performance index YLL-600 YLL-1000 YLL-1200 YLL-1400 Working [...]

Manufacturer/Supplier: Qingdao Huicai Machine Manufacture Co. Ltd.

Product Description 1. The belt ply servicer uses a servo system control, reallized and initiative and stretch-free material servicing, automtic length setting and cutting as well as synchronous plying up. 2. The clamp transfer ring unit moves smoothly, with accurate and reliable positioning, able to reallize the automatic tire unloading after stitching(which has to be [...]

Manufacturer/Supplier: Qingdao Doublestar Rubber & Plastic Machinery Co. Ltd.

Product Description GJ2A50H return tri-angle rubber tyre-side rubber splitting machines Patent No.: ZL200420079531.6 The return tri-angle rubber yre-side rubber splitting machines are mainly used to split various kinds of strip-like (or: Belt-like) rubber materials. The machines can split tri-angle rubber yre-side rubber or multi-compound blank rubber, and sever several kinds of rubber at a time. [...]

Manufacturer/Supplier: Nanjing Jixiang Mechanical Equipment Co. Ltd.

Product Description The main Characteristics: 1. Full automatic 2. Mold ejecting 3. Automatic mould opening device The Main Technical Parameter: Type XLB-D650X650 Total pressure(Tone) 300 Plate Size(Mm) 650x650x70 Daylight(Mm) 350–500 Piston Stroke(Mm) 350 Close Mould Speed(mm/s) ≥ 35 Open Mould Speed(mm/s) ≥ 35 Hydraulic System Pressure(Mpa) 19 Cylinder Diameter(mm) Φ 450 Motor Power(Kw) 7.5×2

Manufacturer/Supplier: Qingdao Green Rubber Machinery Co. Ltd.