Reinforced Thermoplastic Pipe Production Line

Reinforced thermoplastic pipe (RTP for short) has inner plastic pipe layer, middle reinforced layer, and outer protective layer. The materials of inner pipe are PE80, PE100, PA, PERT or PVDF. The middle layer is interweaved wrapping reinforced material with a certain wrapping angle, and the reinforced materials can be aramid fiber, PET fiber, fiberglass, or steel wire. The outer protective layer is HDPE layer adding with antiaging agent and uvioresistant agent. RTP pipe has excellent flexibility and very high pressure resistance, can be provided by coil, long distance laying without joint. This kind of pipe is mainly used in oil, natural gas, high pressure water and special fluid transportation.

Depending on its strength on composite pipe technology for over 20 years, Guangzhou Advance-Tech Co., Ltd has studied related the materials, process and equipments of the RTP and innovated technology. The company took th lead to develop RTP production technology and whole set production line, which can produce RTPs of 50~200mm in diameter, and taking aramid fiber, steel wire, fiberglass as the reinforcement.

Characteristics of RTP

1. High pressure resistance with the working pressure up to above 32Mpa (320bar), the normal working pressure is 16Mpa (160bar 232 psi).

2. The pipe has excellent flexibility, and the pipes whose diameter being smaller than 200mm; Can be provided by coil. Therefore, this kind of pipe is convenient to be transported and easy and rapid to be laid with low construction cost.

4. Corrosion resistance with the service life over 20 years in strong corrosive fluid, low system cost.

5. Low comprehensive cost, wide application scope, suitable to be used in long distance transportation such as oil, natural gas, coal gas, and chemical industry, etc.

6. The common dimensions and typical working pressure: 3 inch-15Mpa, 4 inch-10Mpa, 5 inch-8Mpa.

Application scope of RTPs

1. High pressure water and ethanol injection pipe, petroleum pipeline in oil development

2. Flexible high pressure water pipeline in long distance

3. Nature gas distribution

4. High pressure tap water and irrigation

5. Spring pipe.

Characteristics of RTP line

1. Use patent technology designed by Guangzhou Adance-Tech Co., Ltd.;

2. Distinctive special reinforced tap wrapper technology.

3. Unique complete reinforced tape production line including aramid woven cloth, steel wire reinforced tape, high strength fiberglass tape, etc.

4. The line is suitable to make pipe with different materials as reinforcement, bonded or unbonded structure, and pipe of different pressure degrees.

5. Can make RTP pipes of low cost by using high strength fiberglass reinforced tape developped by Guangzhou Advance-Tech Co., Ltd.

6. Can make high temperature resistant RTP.

7. Se intelligent industrial automatic control technique for gang control.

What we provide

1. Provide the whole set of production line and its technical service.

2. Provide project consultation on RTP technology.

3. Manufacture and spread RTP production through cooperation.

4. Co-develop new type RTP products.