Plastic Machine (GS128V)
The GS-V Plastic Machine with variable pump series is the fine product of energy saving of Guangsu Company, which adopt the advanced international control technology of variable pump. The product adopts high response proportional variable system, making the output power of hydraulic system of plastic injection machine matching with the actual consumption, avoiding the loss of high pressure regulated flow and overflow. Compared to the machine with common constant flow pump, 30%~50% electricity can be saved, showing obvious economic benefits.
In addition, the heat produced by the machine is low, reducing around 30% cooling water consumption, reducing noise around the machine, extending the service life of hydraulic seals of oil circuit and hydraulic oil, reducing greatly the use and maintenance cots of machine, at same time, the strict global environment-friendly requirements are satisfied. The GS-V plastic injection machine with variable pump series brings obvious economic benefits to wide customers relying on its excellent performance.
The GS-V plastic injection machine with variable pump series shows its excellent performance as below:
Energy saving 30~50%;
Quick response of system, short shaping period;
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service life of machine and mold;
Extend the service life of oil circuit system, reducing maintenance times, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; And high accuracy return filter is provided.
Machine Model | GS128V | |||
INJECTION UNIT | A | B | C | |
Screw Diameter | mm | 36 | 40 | 45 |
Length/Diameter Ratio | L/D | 23.3 | 21 | 18.7 |
Theoretical Shot Volume | cm3 | 198.5 | 245.0 | 310.1 |
Injection Weight(PS) | g | 181 | 223 | 282 |
Theoretical Injection Pressure | Mpa | 185 | 150 | 119 |
Injection Rate(PS) | g/s | 89.0 | 110.0 | 139.0 |
Plasticizing Capacity | g/s | 14.0 | 17.3 | 21.9 |
Maximum Screw Speed | rpm | 0-190 | ||
Injection Stroke | mm | 195 | ||
Clamping Unit | ||||
Clamp Tonnage | kN | 1280 | ||
Toggle Stroke | mm | 360 | ||
Space Between Iie Bars (HxV) | mm | 410×410 | ||
Max. Mold Height | mm | 450 | ||
Min. Mold Height | mm | 130 | ||
Daylight Opening | mm | 810 | ||
Ejector stroke | mm | 120 | ||
Ejector tonnage | kN | 33 | ||
Ejector Number | piece | 5 | ||
OTHERS | ||||
System Pressure | Mpa | 16 | ||
Pump moter Power | kW | 11 | ||
Heater Power | kW | 8.7 | ||
Machine Dimension(LxWxH) | m | 4.57×1.28×1.87 | ||
Machine Weight | t | 4.6 | ||
Hopper Capacity | Kg | 25 | ||
Oil tank Capacity | L | 120 |
Plastic Machine (GS128V) offered by Shanghai Guangsu Machinery Manufacture Co. Ltd.