Plastic Film Laminating Machine

This machine laminates plastic film or Kraft-paper on the surface of PP or PE woven fabric with the adhesive material at melting status, or laminates color-printed OPP, CPP film to produce compounded bags.

This machine is highly automatic featured in advanced workmanship, easy operation, low power-consumption and high efficiency. It adopts double extrusion-dies with compounded double-roller to make even compounding. Its finished products are all high intensity and good performance both in application and appearance. This machine is equipped with auto-correcting device for auto guiding and sending processed material. It is speed-adjustable, easy to operate and adaptable to various sizes of compounded bags.

(A) SJ-FMZ1000 PLASTIC LAMINATION MACHINE

MAJOR PARTS:

1.1. -TWO EXTRUDERS, WITH RAIL AND WORKING TRACK SYSTEM

2. -FOUR LAMINATING ROLLERS, FOR DOUBLE SIZE LAMINATION

3. -TWO UNWINDER, Double units of unwinding with automatic tension control, automatically register the exact position.

4. – Double units of unwinder for kraft paper roll or OPP film roll

5. – Plastic woven fabric roll passing-through unit.

5. – Waste-cutting and piercing units (cutting by mechanism system and cutting by hand, two options both are provided)

6. -Major controlling electrical cabinet

7. -Automatically tension controlling electrical caninet

8. -Motors, speed adjustable, 15KW, 4KW, 1.5KW, 1.1KW, 0.37KW,

Frequency converter.

(B)

SPECIFICATION OF PLASTIC LAMINATION MACHINE SJ-FMZ1400

MAJOR PARTS

1: 1350 mm (53.15 INCH)

Double die 1350mm, main extruder (with working rail/running track)

2: Four rollers lamination section

3: Double units of un-winder (Auto Edge Correction)

4: Double units un-winder (2 Sets) for Kraft-paper or OPP film rolls

5: Waste edge cutting, and perforating section

7: Major electrical cabinet, operation panel

8: Automatic edge correction controller

9: Motor of frequency-conversion and speed-regulation 18.5KW one set,

Stepless speed-regulation motor 7.5KW one set,

Torque motor 60Nm 0.55Nm one set

Major specification

Extruder screw specification: Dia. 95 mm * 2800 mm

Screw Length and Dia. Ratio: 28D

Double die parallel, both lengths: 1350 mm (53.15 INCH)

Laminating rubber roller dia.: 303 mm

Working speed: 10m-80m/min. Adjustable

Max. Working width: 1150mm (45.28 INCH)

Production capacity 20-30 million pieces in one year

Main Extruder motor power: 18.5KW

Lamination drawing: Stepless speed-regulation motor 7.5KW one set

Heating power: 40KW

Roll-changing manner: Manual cutting off and changing

With automatic edge-folding and counting section.