Injection Molding Machine (120T)
Clamping force: 120T
1. Clamping unit: Double-toggle five-hings slant-array involute mechanism; Toggle-joint.
2. Injection unit: Double-cylinder balance injection system; Multi-stage pressure&speed injection.
3. Hydraulic unit: Famous brand hydraulic elements; Multiple hydraulic ejector knock-out; Hydraulic single set core in/out.
4. Electrical unit: All computer cintroll system; Molding data memory system; Large LED screen; And multiple options of computer CPU systems;
5. Machine base: Stable and solid; Easy to install and repair; Low viration and thermal transmission of electric cabinet; Low noise.
6. Protective unit: Fully-closed; The surface adopts power spaying treatment to strength durability and attractivenss.
| DESCRIPTION | UNIT | HRF 120 | ||
| Item | —- | A B C | ||
| Injection unit | ||||
| Screw diameter | mm | 37 | 40 | 42 |
| Screw L/d ratio | L/D | 21.6 | 20 | 19 |
| Shot Volume(Theoretical) | Cm 3 | 154 | 180 | 199 |
| Shot weight (PS) | g | 140 | 164 | 181 |
| Injection Rate | g/s | 86 | 100 | 110 |
| Plasticizing Capacity | g/s | 15 | 18.3 | 21 |
| Injection pressure | Mpa | 196 | 168 | 152 |
| Screw speed | rpm | 220 | ||
| Clamping unit | ||||
| Clamping force | KN | 1200 | ||
| Toggle Stroke | mm | 325 | ||
| Space between tie bars | mm | 370×370 | ||
| Max.Mould Thickness | mm | 380 | ||
| Min.Mould Thickness | mm | 130 | ||
| Ejector Stroke | mm | 90 | ||
| Ejector Force | KN | 31 | ||
| Ejector Nomber | Piece | 5 | ||
| Others | ||||
| Max.Pump Pressure | Mpa | 16 | ||
| Pump Motor Power | KW | 11 | ||
| Heater Power | KW | 6.85 | ||
| Machine Dimensions(L×W×L) | m×m×m | 4.0×1.3×1.6 | ||
| Machine weight | T | 3.2 | ||
| Oil Tank Capacity | L | 170 | ||
Injection Molding Machine (120T) offered by Ningbo Jiangdong Xiazhou Plastic Industry Co. Ltd.