SJB ICE-CREAM PAPER CONE MACHINE

Working principle:

A sucking nozzle sucks transfers the pre-printed and cut paper from the paper shelf to the feeding chains and then the paper is carried to shaping moulds, during which the paper is glued thermo sol. The position, length and quantity can be adjusted while in progress without stopping production. The shaped paper is discharged to collector and is piled and counted automatically. The preset piling quantity of paper is carried forward automatically when it is finished without stopping production.

The Specifications of the product produces

1. Minimum height: 100mm

2. Maximum height: 255mm

3. Angle: 15 degree -28 degree (different size products can be made with an adapted die)

Characteristics

High efficiency: Continuous production in three shifts and finished products are counted automatically;

Small Exterior, little room occupied, install expediently(Exterior size 1850X1750X1800MM)

Small loading power, about 5.5 kw.; Frequency conversion and timing, Highprecision

Transaction system adopted box style structure, good firm and stability, high precision; Oil lubericated circularly

High degree of automatization, operated and adjusted easy and maintained expediently.

Production speed:

Produce as many as 190 pcs per minute.

Raw materials:

Ordinary paper, compound aluminum foil paper, dry wax paper not exceeding 100g/m2 or art paper not exceeding 180g/m2

Covering area: 2M x 2M

Package dimensions: (1) Length: 1.50M Width: 1.20M Height: 1.50M

(2) Length: 1.43M Width: 0.71M Height: 1.12M

Weight: Gross weight 1200kgs approx.

Points of considerations:

1. The use of compressed air with no drying treatment may cause the reduced service life of components and unstable product quality.

2. Improper selection of materials (including papers and thermo sol) may reduce low efficiency and cause quality problem.

3. The design printing and surface treatment of papers is very important and be sure to test the papers before use. Improper operation may cause quality problem and reduce low efficiency.

(Please contact us for special requirements)