Double Layer Non-Woven Soft Loop Bag Making Machine (FM-WFB-A)

Performance and characteristics:

This machine is a new-type and high-quality non-woven welding machine, which is developed to meet the market demand of high-end non-woven bags after combining our company’s many years’ experience and strong R & D strength, breaking through the product requirements of technology, performance & appearance. The machine adopts PLC automatic control and touch screen operation, which has obtained “Zhejiang Provincial New Product” and the three national patent of utility model.

The machine with many advantages, such as welding two handles with four dots at the same time, the efficiency improved double compare with single handle welding, which saved manual work. The handle made by one layer non-woven fabric after folding, which increase the load bearing strength and has nice shape. It with human oriented design, stable performance and easy operation, which is perfect equipment for making the non-woven soft handle bags.

Brief Introduction of flow process: Put two rolls of 60mm width non-woven fabrics sheet into the feeding roller. The upper and lower sheets are automatic folding and pattern welding from the sides toward the middle through forming mold to form two separate non-woven straps.

The welded straps are fed into locating manipulator to hold and locate through rear feeding motor, next move the set distance (the length of the straps) by strap locating manipulator, then cut the upper and lower straps at the same time by cutting knife, rotate the upper and lower automatically through the four-point rotary mold and send them into the month of the formed non-woven bags, finally weld the four welding spots of two straps at the same time by two ultrasonic of upper and lower. One completed bag has been finished after welding.

All the processes are controlled automatically by PLC, touch screen and auxiliary button, with the characteristics of easy operation, efficient production of bag and good quality.

Equipment: 1.220V AC motor 2PCS 2. Two-phase step motor 1PC 3. Japan CKG Rotary cylinder 4PCS 4. Japan CKG Pen-type cylinder 4PCS 5. Taiwan Airtac cylinder 10PCS 6. Special square ultrasonic (Xiaman Jingrong brand) 4PCS 7. Round ultrasonic (Xiaman Jingrong brand) 2PCS 8. Gear box 2PCS

Features:

1. Cylinder use Taiwan airtac and Japan CKD brand

2. Ultrasonic device use 6PCS of 1KW

3. Electrical parts use Schneider brand

4. Sealing two handles at the same time

Parameters:

Bag making width: 30MM

Sealing width: 152MM

Bag making speed: 900-1200PCS/hour

Handle length: 380-550MM

Voltage: 380V (3phase 4lines)

Machine size (LXWXH): 3700X1200X1850MM