Blow Moulding Machine (XTC-6)
The Fully Automatic bottle Blow Molding Machine is applied with the most advanced international technology of maching bottles nowadays. The machine has the characteristics of automatization, high intelliggence, stable and reliable preformance, high effiency and low cost. The products are not polluted in the production links and are widely used in the production of food, beverage, cosmetics and medicine vessels.
Preformance and Advantages:
1. Being stable and reliable in automatic unscrambling and the feeding which is automatically controlled by the inventory.
2. Well-closed, no contamination.
3. Prefect oven heating system.
4. Stable revolution & rotation system.
5. The perform tubles are evenly heated easy to module during heating.
6. Less energy consumption and the heating temperature of each section of the perform tube can easily be adjusted when needed.
7. The heater tank adopts the automatic mutual feedback-loop control system and the output of constant power can be conducted automatically in proportion and is not subject to the influences of the voltage fluctuation.
Technical Parameters:
TYPE
ITEM
DATA
BLOWING
Number of Cavities
6
Height(Below Bottle Neck)
1.5m
WARM SYSTEM
Warm Unit
4
No. Of Warm Lamp
6
Max. Heating Power
38kw
ELECTRICAL
Voltage
380V
Frequency
50/60Hz
Service Power
15-22Kw/h
Total Power
42Kw
AIR SYSTEM
Operating Pressure
8-10bar
Air Consuming
0.8-1.0m3/min
Blowing Pressure
≥ 30bar
Air Consuming
2-3m3/min
COOLING
Operating Pressure
2-4bar
Flow Rate
3m3/h
WEIGHT
Total
5.2T
DIMENION
Main Machine
4610*2150*2100mm
Perform Loader
2500*1500*2500mm
Use area
5530*4520*2650mm
CONTAINER
Neck Diameter Range
φ 12mm-φ 32mm
Body Diameter
φ 20mm-φ 70mm
Bottle Height (Below Neck)
≤ 240mm
Container volume
0.05L-0.75L
Material
PET
Theoretical Output
6000BPH(500ml PET Bottle)
According to the bottle shape
MACHINE COLOR
Blue, gray ( according your requirement to change)
Blow Moulding Machine (XTC-6) offered by Foshan Nanhai Xingtuo Precise Machinery Co. Ltd.