Blow Molding Machine (BX-S1)
The features of the BX-S1 Hand-Feeding PET blow molding machine:
It has saved the cost to the maximum extent; It has lower rejection rate, higher production, and more stable performance than the semi-automatic bottle blow molding machine, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow molding machine.
Settings:
(a). PLC colour display: OMRON(Japan)
(b). Pneumatic parts: FESTO(Germany)
(c). Controller of preform transfer: Servo motor National(Japan)
(d). Other electric parts are all world-famous brand
Technical parameter:
Theoretical output: 1600-2200 PCS/hr
Container Container Volume: 0.2-2.25 L
Preform inner diameter: 16-40 mm
Preform inner diameter: 20-100 mm
Container height: 350 mm
Molding Cavities: 2 PC
Max. Mould thickness: 240 mm
Max. Mould plate dimension(LxW): 320×480 mm
Main Machine Mould opening stroke: 120 mm
Clamping force: 200 KN
Dia. Of the stretching rod: 12-14 mm
Distance of stretching: 320-350mm
Temperature controlling zone: 8 PC
Power: 10 KW
Voltage/frequency: 220/380V 50-60Hz
Main machine size: 1800x1100x1700 mm
Weight: 1.5 T
HP air compressor: 2.0m3/30kg
|
Item |
unit |
BX-S1 |
|
|
Production specification |
Max. container volume |
L |
1 |
|
Max. neck diameter |
mm |
38 |
|
|
Max. container diameter |
mm |
80 |
|
|
Max. container height |
mm |
310 |
|
|
Number of cavity |
pcs |
2 |
|
|
Theoretical output |
bph |
1600-2000 |
|
|
Electrical |
Max. heating power |
kw |
21 |
|
Installation power |
kw |
22 |
|
|
Compressed air |
Operating pressure |
Mpa |
7 |
|
Low pressure consuming |
L/min |
1600 |
|
|
Blowing pressure |
Mpa |
≤30 |
|
|
High pressure consuming |
L/min |
1500-2000 |
|
|
Chiller water |
Operating pressure |
Mpa |
0.3-0.5 |
|
Temperature |
3-10 |
||
|
Flow rater |
L/min |
30 |
|
|
Machine dimension |
Machine dimension |
m |
2.5×1.6×1.8 |
|
Machine weight |
kg |
1700 |
|
Blow Molding Machine (BX-S1) offered by Taizhou Huangyan Baixing Plastic Machinery Factory