Auto Block Moulding Machine With Vacuum
EPS Auto Block Moulding Machine with vacuum Characteristics: 1. This machine applies PLC controller and touch screen control system to finish the autocycle process of opening-closing mould, feeding, heating, heat preservation, cooling, demoulding and releasing.
2. This machine is welded by high quality square profile steel and steel plate, which is subjected to heat treatment, to ensure the machine has no deformation, and has high durability after being assembled.
3. This machine applies unique and advanced EPS heat penetration process, which make high quality plates whose six faces and interior are the same perfect. It also reaches remarkable energy saving effect.
4. Advanced EPS heat penetration technique, reasonable pipeline system and unique design construction, which improve productivity, and make this machine leading in domestic EPS industry.
5. Most of the main components are of world-famous brand, with reliable performance, stable quality, long service life and low maintenance cost.
6. This machine applies hydraulic pressure transmission, hydraulic ingot stripping, it makes steady running and tight locking.
7. High production efficiency. The production cycle of each plate is 4-8min. Automatic pneumatic charging shorten the production time.
8. This machine applies high-efficient vacuum system and cooling device to improve moulding speed and reduce the moisture content. Vacuum supported machine is high efficient for making high-density thick plate.
|
Item |
Unit |
SPB2000V |
SPB3000V |
SPB4000V |
SPB6000V |
SPB8000V |
|
|
Machine Cavity Size |
mm |
2040*1240*1030 |
3060*1240*1030 |
4080*1240*1030 |
6080*1240*1030 |
8150*1240*1030 |
|
|
Block SIZE |
mm |
2000*1200*1000 |
3000*1200*1000 |
4000*1200*1000 |
6000*1200*1000 |
8000*1200*1000 |
|
|
Steam |
Entry |
mm |
DN80 |
DN80 |
DN100 |
DN150 |
DN150 |
|
Consumption |
kg/cycle |
25-45 |
45-65 |
60-85 |
95-120 |
115-160 |
|
|
Pressure |
Mpa |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
|
Compressed Air |
Entry |
mm |
DN40 |
DN40 |
DN50 |
DN50 |
DN80 |
|
Consumption |
m3/cycle |
1.5-2 |
1.5-2.5 |
1.8-2.5 |
2`3 |
2.5-3 |
|
|
Pressure |
Mpa |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
|
|
Vacuum Cooling Water |
Entry |
mm |
DN40 |
DN40 |
DN40 |
DN40 |
DN40 |
|
Consumption |
m3/cycle |
0.4 |
0.6 |
0.8 |
1 |
1.2 |
|
|
Pressure |
Mpa |
0.2-0.4 |
0.2-0.4 |
0.2-0.4 |
0.2-0.4 |
0.2-0.4 |
|
|
Drainage |
Vacuum Drain |
mm |
DN108 |
DN125 |
DN125 |
DN159 |
DN159 |
|
Down Steam Vent |
mm |
DN100 |
DN100 |
DN150 |
DN150 |
DN150 |
|
|
Air Cooling Vent |
mm |
DN100 |
DN100 |
DN150 |
DN150 |
DN150 |
|
|
Capacity @15kg/m3 |
min/cycle |
4 |
6 |
7 |
8 |
8 |
|
|
Connected Load/Power |
kw |
19.75 |
23.75 |
24.5 |
32.25 |
40.25 |
|
|
Overall Dimension(L*W*H) |
mm |
5700*4000*2800 |
7200*4500*3000 |
11000*4500*3000 |
12600*4000*3100 |
15700*4600*3500 |
|
|
Weight |
kg |
6000 |
7500 |
11000 |
15000 |
18000 |
|
Auto Block Moulding Machine With Vacuum offered by Hangzhou Fuyang Dongshan Plastic Machinery Co. Ltd.