Type 280 grinder loosen the rubber-steel-textile compound.

The loosened components are separated by means of magnetic-, air- and screening technology.

The textile fluff is very well suited as insulation material.

The separated steel wires have a purity of > 97 percent and can be lucratively sold.

This machine can cut the tire scraps into 2-20mesh small flakes

More questions, just contact us, we will suppli you professional support and solutions

Reclaimed Rubber Machine

1. It is mainly used for removing impurity substance of reclaimed rubber.

2. According the requirement of our customers and our experience for these years, we design and manufacture different kinds of rubber refining machines which are used for producing various strength reclaimed rubber.

3. Waist-dum type rolls

4. The rolling bearings are lubricated by lubricating grease.

Rubber extruder. For rubber material.

Rubber press machine

YJ-PC Computerized Control type

YJ Series Hydraulic Shaper is suitable for thermosetting plastics (bakelite), rubber, glass fibre, magnetic material, powder metallurgy and graphite washer etc. And cool load and unload as well as other lines.

Three kinds controls are available: Manual, button and computer control.

YJ-PC Computerized Control type

The operators technique will not affect the quality of product produced by this machine.

It suits for rubber articles, thermosetting plastics(bakelite etc as well as special products which have complicated process date (such as exhaust or many times air exhaust and midway exhaust ) and need high quality.

Features:

1. Data setting: Original pressure stop, Air exhaust stop, Sulfide 1. Suflide 2, Original pressure exhaust and Midway exhaust.

2. With manual and auto control functions.

3. Computer internal lock with power OFF memory.

4. Temperature control precision: ≤ ± 2

5. Two choices for pressure guage and pressure relay

The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials

Features of mix mill, mixing mills, open mixing mill:

1) The mixer is mainly applicable for both natural and synthetic rubber processing: Thermal mixing of batches and finish squashing.

2) Also it can be used for plastic industry and pigment industry as subsidiary application(PVC)

The reclaimed powder rubber sheeting mill group is mainly used to sheet the powder rubber in rubber factory.

Technical details:

Working dia of rolls: 260mm

Working length of rolls: 620mm

Friction ratio of rolls(front/rear)(lower first layer and the third layer mill): 1: 1.6

Friction ratio of rolls(front/rear) (lower second layer and four layer mill): 1: 1.08

Linear speed of front roll: Can be adjusted by inverter.

Gap adjusted scope: 0.1-8mm

Motor power: 18.5kwx4PCS

Material safegard board: Fixed

Weight: 16000kg

Overall dimension: 3100x1120x3720mm

The batch type waste tire pyrolysis system is using strap conveyer, screw feeder and screw ash collector. Raw material will be heated and pyrolysis in reactor when it rotate. It has characteristic of short pyrolysis time, small labor intensity, low power consumption, catalyst-free and high safety factor. At same time, it resolve many problems of rotate type pyrolysis plant, such as too many airproof points, air pollution, oil vaper outlet and ash discharge outlet are easy to leak, etc. This batch type waste tire pyrolysis plant use original L type gas outlet, which can ensure raw material could be heated uniformly and pyrolysis completely, and also ensure the gas can be separated from carbon black powder efficiently. Compare to other plant’s problem that pyrolysis gas and carbon black always mixing together, output gas doesn’t has deposit and separate space, easy to jam pipeline and pollute oil by large amount carbon black powder, our plant has unexampled advantages. Furthermore, our batch type waste tire pyrolysis system install one waste heat recovery boiler inside to supply sufficient steam for the pyrolysis purpose, in the meanwhile, the WHRB utilizes the heat inside the flue gas so that the whole system heat loss is very low.

This is rubber product making machine with column structure and downward pressing type, it is used to vulcanize all kinds of standard and non-standard rubber or plastic production, such as shoes sole, rubber plate, doormat and conveyer belt etc.

1. Stable pressure, good control in vulcanizing time and temperature

2. Automatic and manual operation system.

3. Reliable performance, stabile quality and good service.

4. Import /export right, Supply promptly quickly.

Vacuum Compression Forming Machine, Vacuumize Shaper Vulcanizer, Plate Vulcanizing Product characteristics:

1. Multifunctional machine applicable for two-layer or three-layer mold

2. Fast mold open/close for high production efficiency, and slow clamp for mold protection

3. Automatic mold forward/backward and two-layer ejector for lower labour intensity;

4. Equipped with two pumps and two oil circuits with low noise, synchronous operation of two tables realizable;

5. PLC-controlled electrical system for easy operation;

6. Optional plate turnover mechanism which is more applicable for the processing of such products as valves and nipples;

7. Vacuumizing shortens cure time to improve quality and output;

8. Partial hydraulic components are genuine products from Germany, America and Taiwan.