Packaging & Delivery
Packaging Detail: standard packing
Delivery Detail within one week
Specifications
Charcoal chamber:
1. Environment friendly
2. High capacity and low cost
3. Easy operate and maintain
]]>FEATURES:
-Even Heat Distrbutton: High Effciency to save lots of drying time required.
-Accurated Thermo-Control: Very high accuracy assured by excellent controller
-Labor-Saving: Compact in size and easily used.
-Promote the Speed for injection Cycle: Decrease melting time by having the raw material predried and preheated.
Capacity(kg) |
Heat power |
Fan power |
Use Voltage |
External Dimensions A×B×H (mm) |
Installation Dimension A×A (mm) |
Weight |
|
SDG-15E |
15 |
2.5 kw |
0.12 kw |
220V1Ø |
550×400×720 |
110×110 |
31 kg |
SDG-25E |
25 |
3.9 kw |
0.12 kw |
220V3Ø |
700×400×920 |
160×160 |
40 kg |
SDG-50E |
50 |
5 kw |
0.18 kw |
380V3Ø |
850×500×1050 |
160×160 |
57 kg |
SDG-75E |
75 |
6 kw |
0.18 kw |
380V3Ø |
880×580×1120 |
160×160 |
60 kg |
SDG-100E |
100 |
6.5 kw |
0.30 kw |
380V3Ø |
1000×650×1250 |
200×200 |
80 kg |
SDG-150E |
150 |
8 kw |
0.30 kw |
380V3Ø |
1050×750×1330 |
200×200 |
93 kg |
SDG-200E |
200 |
11 kw |
0.40 kw |
380V3Ø |
1150×800×1550 |
230×230 |
140 kg |
SDG-300E |
300 |
13 kw |
0.40 kw |
380V3Ø |
1250×880×1600 |
230×230 |
150 kg |
SDG-400E |
400 |
18 kw |
0.50 kw |
380V3Ø |
1400×950×1650 |
280×280 |
190 kg |
SDG-500E |
500 |
18 kw |
0.50 kw |
380V3Ø |
1400×950×1760 |
280×280 |
210 kg |
SDG-600E |
600 |
22 kw |
0.60 kw |
380V3Ø |
1600×1120×2000 |
280×280 |
250 kg |
SDG-800E |
800 |
22 kw |
0.60 kw |
380V3Ø |
1800×1200×2300 |
320×320 |
340 kg |
SDG-1000E |
1000 |
27 kw |
0.80 kw |
380V3Ø |
1800×1200×2600 |
320×320 |
360 kg |
1) Size: 12x 12, 12x 24, 18x 18 inches
2) Thickness: 1.0 to 3.0mm
3) Wear layer: 0.1 to 1.0mm
4) Surface finish: Slate finish, Shale finish, Leather finish
5) UV coating and beveled edge
6) Backing: Available in self-stick and dry back
7) Various types of embossing and patterns are available
8) Used for the flooring of homes, markets, schools, hospitals, offices and bus
9) Customized packing is welcome
]]>Plastic Agglomerate will be a waste of thermoplastic film and wall thickness of less than 2 millimeters products direct granulation equipment, it can make granule for soft PVC, high-low-pressure polyethylene, polystyrene, thermoplastic polypropylene plastics and other waste products, or the films, also be of granulation for the abandoned polystyrene foam products.
The main shaft is metal processed after being heat-treated and adjusted straight and this machine is of low noise but high output, with the removable blade as the fixed blade, resulting in convenient repair and maintenance.
Model |
Motor Power |
Volume(L) |
Rotary Blade(pc) |
Fixed Blade |
Rotating Speed(rpm) |
Output |
(KW) |
(pc) |
(kg/h) |
||||
FAL200 |
55 |
200 |
2 |
6 |
950 |
150-180 |
FAL300 |
75 |
300 |
2 |
8 |
850 |
200-250 |
FAL500 |
90 |
500 |
2 |
8 |
850 |
270-350 |
FAL700 |
90 |
700 |
2 |
8 |
850 |
450-500 |
Cap making machine
Full-automatic plastic bottle cap making machine is a latest model high efficiency press molding machine. It uses two work plates to fix position, and uses the pressure generated by up-down motion of position to make products. A pressure balance system inside ensure each product is pressed with the same pressure. Product molds are made by special process, and feature high precision, highly resistant to pressure, durable against wear, and structurally simple. Products made by this machine exhibit stable quality and low defect rate. The product quality (in terms of appearance and precision (is higher than those made by regular injection molding machine.
If you want to know more information, please visit our website and contact us directly.
]]>The peeling machine mainly peels the cylinder foam into continuous long slice which can be used directly or used after further lamination by laminating machine. It is widely used in garment industry, shoes industry, upholstery and furniture industry, mattress/cushion/pad industry, etc.
]]>Plastic Recycling Granulator: This machine is specially designed for making use of clean waste of P. P. Woven bags, plastic films, leftover bits and pieces of plastic material or other thermoplastic material to make recycled plastic granules. It maximizes the utilization ratio of waste material while reducing production cost and it brings about remarkable economic efficiency.
]]>Feature:
1. For PP PE film;
2. Capacity: 30-600kgs/h;
3. Power; 30-75KW;
This kind of Recycling Machine is called Agglomerator for films, can be made into big, high density granules.
¡ ¡ |
MODEL |
PS-350 |
PS-450 |
PS-650 |
ITEM |
¡ ¡ |
|||
MOTOR POWER |
380V 50HZ |
380V 50HZ |
380V 50HZ |
|
22kw |
37kw |
55kw |
¡ ¡ |
¡ ¡ |
BLOWER POWER |
380V 50HZ |
380V 50HZ |
380V 50HZ |
|
7.5kw |
7.5kw |
11kw |
¡ ¡ |
¡ ¡ |
TOTAL POWER |
28kw |
50kw |
68kw |
|
¡ ¡ |
¡ ¡ |
|||
CUTTER DIAMETER |
¦ µ 350mm |
¦ µ 450mm |
¦ µ 650mm |
|
¡ ¡ |
¡ ¡ |
|||
FEED DIAMETER |
< 6mm |
< 6mm |
< 6mm |
|
¡ ¡ |
¡ ¡ |
|||
DISCHARGING PIN-SIZE(MESH) |
15-120 MESH |
15-120 MESH |
15-120 MESH |
|
¡ ¡ |
¡ ¡ |
|||
PRODUCTION(KG/H) |
50-150 |
80-250 |
100-350 |
|
¡ ¡ |
¡ ¡ |
|||
DIMENSIONS(MM)(L*W*H) |
2300*1000*3300 |
3500*1200*4000 |
4500*1350*4500 |
Basic Equipment:
Clamping system: Diagonal two tie bar center clamping bi-directional synchronous high precision linear guiding clamping device
Extrusion system: Hard gear surface Decelerator+imported DC drive
Die head: Accumulator head
Hydraulic system: Japan hydraulic valve, seal parts and proportional
Control Control system: Whole set of European closed-loop bi-proportional control system
Specifications | PXB-120 A | |
Material | PE,PP | |
Max container capacity | L | 350 |
Output(dry cycle) | Pc/hr | 160 |
Machine Dimension(LxWxH) | M | 9.0×4.0×6.5 |
Total weight | T | 46 |
Clamping Unit | ||
Clamping force | KN | 1500 |
Platen opening stroke | mm | 600-1400 |
Platen size | mm | 1400×1750 |
Max mould size(WxH) | mm | 1200×2050 |
Mould thickness | mm | 610-750 |
Power | ||
Max drive | KW | 180 |
Total power | KW | 260 |
Fan power for screw | KW | 0.25×6 |
Extruding motor | KW | 110 |
Hydraulic pump motor | KW | 55+15 |
Air pressure | MPA | 1 |
Air consumption | M 3 /min | 4 |
Average energy consumption | KW | 155 |
Extruder unit | ||
Screw diameter | mm | 120 |
Screw L/D ratio | L/D | 30 |
Melting capacity | Kg/hr | 280 |
Number of heating zone | zone | 6 |
Extruder heating power | KW | 39 |
Die | ||
Number of heating zone | zone | 6 |
Power of die heating | KW | 39 |
Max die-pin diameter | mm | 600 |
Accumulator capacity | L | 25 |
Building long-term customer relationship and pursuing technology innovation have been the foundation of fully machinery.
FL machinery assures product quality by using of high quality components from Europe, the USA, Japan, and Taiwan. By applying advanced 3-D software design, our engineers have come up with innovative and advanced machines that integrate the latest mechanical, electrical and hydraulic technologies into one machine, to produce very efficient and low maintenance plastic machines.
Item |
unit |
FL-360 |
|||
Injection unit |
screw diameter |
mm |
60 |
65 |
70 |
screw l/d ratio |
l/d |
22.8 |
21 |
19.5 |
|
theoretical shot volume |
cm3 |
895 |
1050 |
1218 |
|
shot weight(ps) |
g |
805 |
945 |
1097 |
|
injection pressure |
mpa |
213 |
182 |
157 |
|
screw speed |
r. P. M |
180 |
|||
stroke of nozzle |
mm |
340 |
|||
Clamping unit |
clamping force |
kn |
3600 |
||
stroke of moving platen |
mm |
650 |
|||
mould thickness (min-max) |
mm |
230-700 |
|||
space between tie-bars |
mm |
660×660 |
|||
hyd. Ejector force |
kn |
120 |
|||
hyd. Ejector stroke |
mm |
150 |
|||
no. Of ejector |
pc |
13 |
|||
Others |
pump motor power |
kw |
30 |
||
heating power |
kw |
20 |
|||
machine dimensions(l*w*h) |
m |
6.6×1.8×2.5 |
|||
machine weight |
t |
11 |
|||
oil tank capacity |
l |
630 |