The machine is suitable for the packing of non-sticky, bulk or granular medicines, foodstuffs and seeds.
Features:
1) contacting switch with long service life is adopted to collect the photo standard sign.
2) adjustable measuring system is used to adjust the content during the operation of the machine.
3) heat sealed roller is supported by imported needle bearing, which is lubricated by oil code to maintain the durable stablilty of the roller precision.
4) the cutting system with independent flying knife is used to adjust the cutting position.
5) spare parts contacting objects and the surface of the machine adopt stainless steel, which are easily washable and confirm with GMP cortification.
Model: |
ND-DXD-K150 |
Bag Size: |
L: 80-150 mm, W: 60-105mm |
Capacity: |
35-80 Bags/min |
Filling Range: |
30-150ml |
Power: |
220V, 50Hz, 1.5Kw |
Weight: |
350KG |
Dimension:(L*W*H) |
600*790*1800mm |
Features:
Suited for 30-80g. Paper.
Controls bag length through the hunman-machine touch screen interface.
PLC pragrammable servo motor control system.
Equipped with an accurate photocell system for printed mark tracking.
Color mark error stopping system.
Automatic oil lubrication system.
Introuduction:
This machine forming the paper bag in one process from roll paper, edge folding, tube forming, cutting, gluing, botton folding, botton gluing and finishing bag easy operation, low power consumption, high efficiency. It is an ideal machine for producing food bags like bread bags, KFC bags and Mcdonald’s bags.
Note:
Machine speeds dependent on paper&adhesive, bag dimensions, operator knowledge, and general work philosophy.
Paper Bag |
Machine |
Utting length(C): 150-400mm |
speed: 100-300pcs/min |
Bag length(H): 140-390mm |
Paper thickess: 30-80g/m2 |
Bag width(L): 80-250mm |
Power: 6kw |
Gusset depth(S): 10-50mm |
Total weight: 3500kg |
Standard fl ap(P): 12-17mm |
Dimensions: 4400(L)x1650(W)x1850(H)mm |
Fill seal form Packing Machine (DGS-350) is applicable to
1, Pack quantitative liquid in medicine, beverage, dairy products, health care products, food, cosmetic and similar liquid products packaging field.
2, With the qualities of unique structure, full function, stable operation and reliable quality,
3, The machine has the same technology as the international congener, which has got the highest domestic level.
Main Characteristics:
The packing machine with good stainless steel as the material, according with the CE Certification standard.
PLC control, stepless transducer control.
All the 22 processing units from roller spreading, forming, filling, end sealing, lot number stamping, end cutting, divide cutting, etc. Are controlled by program.
Human machine interface with easy and clear operation.
Accurate electronic peristalsis pumps filling, no drop, bubble and spill.
Packing material |
Packing material :pvc/pe Thickness :0.3 — 0.4mm Width :280 — 345mm Outer diameter :≤Φ 400mm Inter diameter :Φ 70 — 76mm |
Capacity |
1.5-60ml/flash |
Max forming depth Cutting frequency |
12mm |
≤ 22 times/min |
|
Water consumption |
6L/min |
Air consumption |
110L/min |
Installed power |
12KW |
Electrical source |
Three-phase five wire AC380V 50Hz |
Outer size(l*w*h) |
3870mm *1780mm *1850mm |
Weight |
3400Kg |
This set Packing Equipment is composed of Model GD6-200C Rotary Packing Machine, KJL-10 Mulithed Weigher, YJL-500A Liquid&Paste Filler, TSZ-100 Bucket Elevator and Working Platform.
GD6-200C+KJL-10+Bucket Elevator+Filler+Feeder+Work
1. Easy to operate, adopt advanced PLC from Germany Siemens, mate with touch screen and electric control system, the man-machine interface friendly.
2. Automatic checking system: No pouch or pouch open error, no fill, no seal. The bag can be used again, avoid wasting packing materials and raw materials.
3. Safety device: Machine stop at abnormal air pressure, heater disconnection alarm.
4. All the parts contact to the materials are made of stainless steel.
5. Product Process:
1. Fetch bag
2. Open bag
3. Open bag and Fold upside of the bag
4. Feeding(popcorn and cream)
5. Sealing 1st and folding underside of the bag
6. Sealing 2nd and forming & outputpackages
]]>1. Application: It is applied to bopp, pet, cpp, pvcd, al-plated film, al-tissue as well as the compound film and paper with the same properties. Its mechanical speed is 130m/min.
2. Main transmission unit: The main transmission unit is controlled by alternating current frequency inverter vector. The heat beat and rubber-plated mesh roller synchronism adopts swing arms to control its tightness and looseness. Performance: Assure the tightness and looseness of the film in the oven tunnel.
3. Material feeding device: Group 1 and 2 adopt dual stations inching reversing, automatic receiving unit and dual photoelectric edge-correcting device, while the tension adopts automatic tension controlling. Performance: Keep evenness of film.
4. Rubber-plated unit: The anilox rollers control the scrapping and inking amount by scraper. The thickness of rubber can be adjusted freely through the ink scrapers. While the rubber roller adopts dual air cylinder to increase the pressure, whereas the pressure can be adjusted freely. It is also equipped with rubber-plated film while stopping to lift automatically.
5. Strcture of oven tunnel: The temperature in the oven tunnel through three-pace intelligent temperature controller is equipped with inner cycling unit, three-pace independent hot air drying system, the material-protecting roller and the hot drum can rotate synchronically, and it is equipped with gas cap heating channel and film getting through operation panel.
6. Laminating hor drum and press roller unit: Laminating hot drum is heated through the hot oil to make the temperature of the hot drum evenly, saving electricity. The pressing roller is controlled by dual air cylinder. While the pressure can be adjusted freely.
7. Material collecting unit: It adopts dual station reversing jogging and automatic material collecting while the rolling adopts moment motor.
8. The spare parts’ original producing place: 1. The frequency invertor (from inovance); 2. The automatic tention(from china); 3. The air cylinder(from taiwan); 4. The switch (from shanghai ergong); 5. The low-voltage electricity(from zhengtai delixi); 6. The temperature controller(from yuyao); 7. Anilox roller (from yuncheng) 8. The moment motor (from china)
Technical parameter |
GSGF-800 model |
GSGF-1100 model |
Layers of complex |
2 Layers |
2 Layers |
Laminating width |
800mm |
1100mm |
Loading material’s diameter |
600mm |
600mm |
Adjustable range of laminating linear speed |
50-120m/min |
50-120m/min |
Max. adjustable temperature of dry oven |
80 ºC |
80 ºC |
Max. adjustable temperature of heat beat |
70 ºC -90 ºC |
70 ºC -90 ºC |
Tension ratio |
≤1/1000 |
≤1/1000 |
Total power |
78kw |
92kw(equipped with electric heating board) |
Weight |
8000kg |
9400kg |
Overall dimensions (L×W×H)(mm) |
11500×2500×3150 |
11500×2800×3150 |
Stretch wrapping machines are used to wrap stretch film around a loaded pallet. Film provides extra support while the products are being transported and storaged to protect them from tip, spill or from being damaged. Additionally, wrapped loads can easily be separated and identified. Stretch pallet wrapper is widely used in chemical industry electronic industry building materials home appliances papermaking foodstuff and drink etc.
Technology Parameters | |
Model | T1650F |
Wrapping Size(L×W)(mm) | (500-1200) ×(500-1200) |
Wrapping Height(mm) | L Type:(800-1800) / H Type:(800-2400) |
Wrapping Efficiency(loads/hour) | 20-40 |
Turntable Speed(rpm/min) | 3 – 12 |
Turntable Diameter(mm) | Φ: 1650 / H: 85 |
Turntable Loading(max)(kg) | 2000 |
Electrical Requirement | Single Phase 220V / 50HZ / 20A |
Power(kw) | Turntable:0.75; Film Carriage:0.4; Steel Tower:0.37 |
Film Carriage | Pre-Stretch Type |
Machine Weight(kg) | 900 |
Machine Dimension(mm) | L Type:2545×1650×2280 / H Type: 3500×1800×980 |
The SY-30B plastic bottle cap moulding machine can melt those studded plastic with heat and cut into the moulding hollows, then make into different types of caps. The caps made from this machine are smooth and nice.
It is computer-controled machine and optimizes the stability and endurance.
It is easily handled, power-saving and less cost of labour. It is tripled the propuction capcity of the same type of machine. It is a big step in the production of caps and abtained the national patent.
MAIN TECHNICAL FEATURES
Type: SY-30B
Capacity: 10000-12000pcs/hr.
Power for electric machine of the die cut machine: 2.2KW
Power for electric machine of the extrusion machine: 4KW
Power for heating ring of the extrusion machine: 7.2KW
Power, Voltage: 380V,50HZ;or 220V,60HZ
Weight: 2800kgs
Size: 2400x1300x1700mm
]]>The filling machine widely used in daily chemical, food, grease and other industries, may be filling different liquid products.
Specifications:
Filling speed: 60-100 bottles / min
Filling accuracy: ± 1%
Current: 3A
Power: 220/110V 50/60Hz
Power: 500W
Air pressure: 0.4-0.6MPa
Optional Model: 5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml
Principle Features:
A. RG6T-6G filling machine in reference to similar products on the basis of improved design and added some additional functionality.
B. So that the use of the product operation, accuracy error, installed capacity adjustment, equipment cleaning, maintenance, etc. Is more easy and convenient.
C. Compact machine design is reasonable, simple and beautiful appearance, filling volume adjustment easily.
D. There are six filling machine head, driven by six cylinder, filling materials more quickly and accurately.
E. Using German FESTO, Taiwan AirTac pneumatic components and Taiwan’s electrical control parts, and stable performance.
F. Material contact parts are used 316L stainless steel materials.
]]>RZZY6000-10U rotary emulsion explosive automatic filling machine, which are suitable for emulsified explosive plastic soft packaging automatic propellant fields.
The machine features are:
1. Employing less, big capacity, high efficiency, charge density, quantitative precision accurate.
2. Explosive roll is beautiful appearanced, Cleaner Production, the equipment operation safety.
3. Each device the machine design novel, compact structure, automatic film feeding, employing less efficiency high.
4. Each equipment need only 1 person operation, the production capability 2000-5000kg/h, the medicine volume diameter range 27-45mm, propellant temperature 48-55.
5. It can be used for physical sensitization, chemical sensitization and mixed sensitization.
6. The patent number of the invention patent:
ZL. 2007 1 0185675.8
The patent number of utility models:
ZL. 2007 2 0138417. X
item |
technical parameters |
total power |
13kw |
voltage |
380v |
volume diameter range |
φ27—φ45 |
output |
2000–5000kg/h e.g:φ32(200g) |
more or less(200g) |
±5% |
size |
3000×1300×2200(mm) |
sealjing speed |
0-300 times per minute |
sealing material |
U-shape aluminum clip |
volume of hopper |
220litre |
air source |
0.8—1.0 MPa |
This machine is widely used in dairy company to wash plastic case, box, crate. Output: 600 box per hour. If you need video, please contact me.
MODEL XXJ FULL-AUTOMATIC PLASTIC CASE RINSER
XXJ full-automatic plastic case rinser is a cleaning machine which is developed by our company’s enginner. It is mainly used for washing various plastic boxes, such as milk bottle packing plastic box, drink and beer bottle packing plastic box and so on, with the characteristics of holding fewer area, water saving and good cleaning effect.
Characteristics:
1. All-directions spraying: Upper to down spraying head+down to upper spraying head.
2. Three stages spraying. Each stage washing time is 20 seconds. In each stage, you can use different abluents. The whole washing time is 1 minute.
We can supply video of this case rinser. Or if you require, we will drive you to see our model xxj crate rinser in domestic dairy company.
Model: |
XXJ |
Washing Speed: |
600 boxes/hour |
Dimension: |
7000(L)*750(W)*1160(H)mm |
Shipping Packing: |
Plywoodpacking(standard export packing, fumigated) |
Standard: |
CE certificate |
Supplier Style: |
Manufacturer, with import and export license |