1. The foam cutting machine is controlled by a PC computer capable of cutting most of 3D objects out of EPS

2. The cutting is performed with a resistant hot wire moving in the vertical and horizontal axes through the use of stepper motors controlled by an electronic controller connected to a PC and controlled with our software

3. Almost any 2D or 3D shape prepared in graphics software (CoreDraw, AutoCad, Rhino3D, and more) can be loaded in and cut in foam in minutes

4. All our units can be equipped with turntables and other additional add-ons making them truly versatile and limited only by the operator’s imagination

Lettering and logos:

PreCast concrete molds

Pipe insulation

Columns

Store props and displays

POP display

Prototype products

All kinds of packaging

Theme props

Amusement

Main features:

1. Four running modes: Fully automatic, semi-automatic, middle start-up and manual operation.

2. The machine adopts opening and closing mould, locking mould of the hydraulic system with stable running.

3. Steam general valve uses steam ball valve with good airproof characteristics and long life.

4. Four safe fixing: Safe and interlock switch, pause switch, urgeent stopping switch, safe valve.

5. Touch screen display, graphical interfaces, Chinese display, soft button etc.

6. Refrigerating constrainedly, high cooling efficiency, low water convenient filling material, high effectiveness.

7. Feeding material automatically, convenient fiiling, high efficiency.

8. The main components such as CPU, touch screen are from the well-known company with stable quality. 9. Block conveying line and electronic weighing scale for machine is optional.

1. Combined knowledge of European and Asian molders

2. The pressure regulated filling system ensures homogenously filled molding parts, with the steam principle of low pressure, large flow, the pipe system is simple, and effective

3. The new developed hydraulic drive concept ensures the opening and closing in a total and even way, fast, strong, and energy saving

4. The vacuum system is equipped with the liquid and condenser, unique isolated drainage system, drained water does not go through vacuum box anymore, saving much time, and energy

5. Unique material filling system, sensor controlled material filling container, evenly fill in thus low tolerance in density

6. Low moisture contents, better energy saving, shorted cycle time, and perfect stabilization of performance

7. Optimized mold change, good molds compatibility, and cost saving

Large volume condenser with high efficiency for central and single vacuum

8. Solid steel construction with aluminum coated frame, processed by high temperature annealing, heat treatment, and imported CNC processing center Surface de-rusted by sandblast and coated by zinc, sprayed by anti-corrosive paint

9. Modern communication interface/machine control, continuously enhanced machine control platform

10. The machine is made of quality steels, those guarantee a high long life

The long life steel construction is achieved by hot galvanization with after wards cover-lacquering

Main features:

1. Foam products of various specification produces by this machine have low moisture content, low energy consumption and stable size.

2. It can perform four operation modes such as fully automatic, semi-automatic, middle startup and manual operations.

3. The machine adopts machanical de-molding De-molding positions can be adjusted according to the thinkness of product.

4. The machine adopts three kinds of safe protects such as door panel lock, pause switch, urgent stop to guarantee safe and dependable operation.

5. Touch screen diplay, graphic interface, Chinese display, soft button and other man machine coversation modes.

6. The guide of moving molding board is separated with beaing to prolong the life of pillar.

7. Optimizing shpe enable the machine to be good characteristics to meet the production of different EPS products with more than 98% pass and 20-60 mould/hour shaping speed.

8. Triple pipline drainage technique, fixed mould, mobile mold and independent with vacuum system drainage enable cooling and drainage to be fast and expedite.

9. Main components and parts of this machine such as CPU module, thuch screen, pneumatic ware, hydraulic component and vacuun pump, etc have adopted the famous brands both at home and abroad.

10. Computer can memotize the technical prameters produced with differnt moulds that can be transferred anytime.

11. It can realize computerized production control and management with high automation, simple operation, easy maintenance, good workingenvirenment, and low labor intensity.

Main Features:

1. The machine adopts PLC and touch panel with auto filling material, auto electronic weighing, auto controlling chamber temperature, pressure and level testing to.

2. It uses an electronic weighing system and level sensor to control raw material volumes and expanded density, while ensuring density tolerances within 3%.

3. The temperature and the steam pressure in the chamber are controlled by proportion valve from Germany and advanced decompression valve from Japan. It can enable the pressure from the exit of decompression valve to be invariableness and enable the chamber temperature to be controlled to within 1%. And then it also can guarantee the consistency of EPS raw material to prevent the EPS raw material from agglomeration because of the bad control of the temperature.

4. It adopts automatic feeding device and electronic weighing device. Combining material control it can realize auto feeding and offer high production efficiency and low labor consumption.

5. Main components and parts of this machine such as electric appliance, pneumatic ware valve ect have adopted the famous brands both at home and abroad to be stable running and long life.

6. The chamber adopts compressed air to blow material to raise the speed out of the material.

7. Computer can memorize the technical parameters produced with different brands, specifications, pre-expander processes and parameters that can be transferred anytime.

8. The Fluidized Bed Drier can be bought by customer solely.

Main features:

1. The machine adopts PLC and touch screen for controlling the mould opening, mould closing, material feeding, steaming, tempreture keeping, vacuum cooling, de-moulding and ejecting.

2. The machine adopt shigh-efficient vacuum system and condensate device to improve moulding speed and reduce the moisture content. Vacuum supported machine is very efficient for making high-desity and thick blocks.

3. The machine is welded from high-quality profile steel, through heat treatment, ensuring high strength of the machine without deformation, and possibility of bearing the expansion force of the high-desity product.

4. Adopting advanced moulding technic, thee machine is applicable to produce high-desity and low-density block and ensure same quality of inside and outside block.

5. The mould cavity surface is coated with Teflon, ensuring easy de-mould and good finish of the block.

6. Block conveying line and electronic weighing scale for machine is optional.

1. EPS Machine Combines knowledge of European and Asian molders

2. The pressure regulated filling system ensures homogenously filled molding parts, with the steam principle of low pressure, large flow, the pipe system is simple, and effective

3. The EPS machine with new developed hydraulic drive concept ensures the opening and closing in a total and even way, fast, strong, and energy saving

4. The vacuum system is equipped with the liquid and condenser, unique isolated drainage system, drained water does not go through vacuum box anymore, saving much time, and energy

5. Unique material filling system, sensor controlled material filling container, evenly fill in thus low tolerance in density

6. Low moisture contents, better energy saving, shorted cycle time, and perfect stabilization of performance

7. Optimized mold change, good molds compatibility, and cost saving

Large volume condenser with high efficiency for central and single vacuum

8. Solid steel construction with aluminum coated frame, processed by high temperature annealing, heat treatment, and imported CNC processing center Surface de-rusted by sandblast and coated by zinc, sprayed by anti-corrosive paint

9. Modern communication interface/machine control, continuously enhanced machine control platform

10. The EPS machine is made of quality steels, those guarantee a high long life

The long life steel construction is achieved by hot galvanization with after wards cover-lacquering