1. For soda water, carbonated drinks, beer

2. Carbonated filling machine: 5000-40000BPH (200ml to 3L)

3. CE, UL, ISO.

General description

3-in-1 filling monoblock, combined with rinsing, filling and capping. It is innovated and designed in the requirement of carbonated soft drinks and soda water, on the basis of introducing, digesting and absorbing advanced technology from Germany and Italy.

Main features

Rinser

This machine is rotary washing machine, which mainly use for beverage such as mineral water or carbonated drink, new bottle enter the equipment by star wheel, through clip and overturn mechanism make bottle down, after washing, it overturn bottle up automatically, then convey to the filling part by star steel, the main material and washing clip is stainless steel.

Filler

A. Filling valve use isobar machinery valve, High speed and big flow, the high accuracy filling valve, filling speed fast, the liquid level is stable.

B. Main drive adopt gear drive independent, high efficiency, small noise, long life, maintenance-free, transducer can control the main motor speed, the machine adopt Variable-frequency variable speed, whole operations area, engine base is stainless steel contain carbon steel.

C. Guide bottle system, simple structure, according to bottle style, can change

D. The whole machine can be controlled automatically by PLC

E. Filling hydraulic material liquid level height adopt liquid level probe control, liquid level steady, filling reliable

F. The machine important parts and electrical elements is import production

G. Filling hydraulic material can be controlled automatically. And have CIP washing connector.

Capper

The bottle into the click wheel through the transition card bottleneck Capping Machine. Rotary Capping Machine knife stuck on the only bottleneck location, keeping the bottle upright and prevent rotation. Capping Machine Capping head to remain in the revolution and rotation, under the action of the cam to achieve grasping cap, capping, screw cap, cap off action, complete the capping process. Management Capping Machine is located in the top cover, through drop-cap rail and cover plate connected Capping Machine allocated. Finished bottle through the bottle capping machine sent from the click wheel to the bottle conveyor chains, conveyor chains send out the triple play by the filling machine, into the next process.

Equipment structure

Rack

Rotary rinser

Rotary filler

Rotary capper

Bottle infeed and outfeed system

Control

Main configuration

Touch screen: THINGET

PLC program controller: Mitsubishi

Inverter: Mitsubishi

Photoelectrical controller: Omron

Proximity switch: Omron

Other electrical components: Schneider

Pneumatic component: Airtac

Water pump: Nanfang

Main motor: Siemens

Bearing: Harbin

1. For water, wine, alcoholic drinks

2. Water filling machine: 5000-40000BPH (200ml to 3000ml)

3. CE, UL, ISO certificate

General description

3-in-1 filling monoblock, combined with rinsing, filling and capping. It is innovated and designed in the requirement of still pure water and mineral water, on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy.

Main features

1. Rinser

Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.

Rinsing machine adopts NANXIN original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.

Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.

Made of stainless steel of superior quality.

Equipped with bottle jam protection device.

2. Filler

The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.

3. Capper

Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.

Equipment structure

Base

Rotary rinser

Rotary filler

Rotary capper

Bottle infeed and outfeed system

Control

Main configuration

Touch screen: THINGET

PLC program controller: Mitsubishi

Inverter: Mitsubishi

Photoelectrical controller: Omron

Proximity switch: Omron

Other electrical components: Schneider

Pneumatic component: Airtac

Water pump: Nanfang

Main motor: Siemens

Bearing: Harbin

Application:

Automatic Tray-Free Biscuit Packaging Machine(QNF360) is suitable for packaging several pieces of biscuits into one package without tray

Applicable for biscuits of square, round, oval and other shapes

Main technical data:

Capacity: 20 to 80 packs/minute

Length: 100 to 240mm

Width: 40 to 80mm

Height: 40 to 70mm

Floor space:

Main machine (L x W): 4, 100 x 965mm

Feeding section (L x W): 3, 100 x 370mm

Power consumption: 4.1kW, single phase: 220V

Net weight: 1, 500kg

Packing material: Any heat-melt-cut sealing materials such as paper, PE, OPP, AL

Mechanical features:

Design of mechanical structure is simple and reasonable, convenient to operate and adjust.

Long seal device consists of three pairs of draw wheels, ensures high speed, stable and beautiful sealing.

Special tray-free tubing conveyance mechanism, stable and reliable

Elaborate automatic feeding device able to take the packing items into the machine accurately.

Packaging size can be adjusted easily and quickly

Electrical features:

Adopts PC control, reduces the mechanical contacting points and makes the system more stable and reliable.

Frequency control makes the operation easy and simple.

Adopts photoelectric sensor to test the color mark, non-contact control, two-way tracing.

Optional auxiliary device:

Automatic grouping device.

Automatic tidying device.

Automatic feeding device.

Automatic film connecting device.

Date printing device.

Applications:

Automatic Horizontal Packing Machine (QNS450) is suitable for packaging articles such as instant noodles, biscuits, udons, snacks, medicines, soaps, tissues, chocolates, instant frozen-foods, adhesive tapes, industrial parts and daily necessities.

Main technical data:

Capacity: 50 to 200 packs/minute

Bag size:

Length: 70 to 400mm

Width: 30 to 150mm

Height: 5 to 88mm

Floor space (L x W x H): 5, 400 x 1, 020 x 1, 750mm

Power consumption: 4.56kW

Net weight: 1, 000kg

Mechanical features:

Simple structure, high automation, high speed and stable operation

Double-drive long sealer and automatic switch structure

Center height of the end sealer can be adjusted with the height of packing items

Feeding position can be adjusted at any time during operation

Low noise, light vibration and easy maintenance

Electrical features:

Intellectualized, digital servo motor control system

Operating status, parameters and malfunction can be set and displayed through the LCD screen. Frequency control, convenient, accurate and reliable

Color mark tracking point can be positioned and tracked automatically

Length of packing bag can be measured and memorized automatically.

Optional devices:

Automatic grouping device.

Automatic tidying device.

Automatic feeding device.

Automatic film connecting device.

Date printing device.