Be used for the mastication, mixing, warming up and sheeting of rubber.
Specification | XK-660 | XK-710 |
Roll diameter: | φ660mm (26″) | φ710mm (28″) |
Working length of the rolls: | 2130mm (84″) | 2200mm (87″) |
Structure of front roll: | bored roll or drilled roll or fluted roll | bored roll or drilled roll |
Linear velocity of the front roll: | 28.6/32.53m/min | 3~30m/min |
Friction ratio of rolls: | 1:1.09 / 1:1.24 | 1:1.083 |
Material of rolls: | chilled cast iron | chilled cast iron |
Hardness of rolls: | HS68~75 | HS68~75 |
Max. nip of rolls: | 15mm | 17mm |
Bush: | bearing type | bearing type |
Feeding capacity per batch: | 165Kg | 210Kg |
Motor power: | 180/245KW | 280KW |
Voltage1: | 420V, 50HZ, 3 phrase; | 380~440V, 50HZ, 3 phrase; |
Voltage2: | 220V, 50HZ, single phrase with transformer | 220V, 50HZ, single phrase with transformer |
We are the largest manufacturer of rubber machinery in China especially of conveyor belt curing press. We supply multi-unit press for the vulcanization of the conveyor belts such as steel cord belt, nylon belt, PVG belt, anti-flammable belt, etc.
Heating platen size is from 5, 700mm to 15, 000mm.
Model Performance parameters | XLB-1800X | XLB-1800X | XLB-1600X | XLB-1600X | XLB-1600X | XLB-1400X | XLB-1400X | XLB-1400X | XLB-1100X | XLB-1300X | |
12000*2 | 10000*2 | 10000*2 | 10000*1 | 8500*1 | 10000*1 | 8000X2 | 5700*2 | 5700*2 | 4000*2 | ||
Heating plate size (mm) | 1800*12000 | 1800*10000 | 1600*10000 | 1600*10000 | 1600*8500 | 1400*10000 | 1400*8000 | 1400*5700 | 1100*5700 | 1300*4000 | |
Nominal total pressure (mn) | 74 | 72 | 56 | 64 | 47.6 | 49 | 34 | 25 | 17.55 | 14.56 | |
Heating plate unit pressure (mpa) | 3.4 | 4 | 3.5 | 4 | 3.5 | 3.5 | 3.1 | 3.13 | 2.8 | 2.8 | |
Ram diameter (mm) | 500 | 500 | 450 | 500 | 500 | 450 | 400 | 360 | 500 | 500 | |
Ram Qty (pc) | 18 | 18 | 18 | 18 | 14 | 18 | 16 | 10 | 5 | 4 | |
Max. Ram stroke (mm) | 400 | 300 | 400 | 300 | 300 | 300 | 400 | 400 | 520 | 250 | |
Clamping force (mn) | 1.2 | 1.5 | 1.2 | 1.2 | 0.6 | 0.9 | 1 | 0.72 | 0.5 | 0.5 | |
Tensioning force (mn) | 1.1 | 1.2 | 1.1 | 1 | 0.5 | 0.8 | 0.9 | 0.6 | 0.4 | 0.4 | |
Steam pressure (mpa) | 0.63 | 0.6-0.8 | 0.63 | 0.6-0.8 | 0.63 | 0.63 | 0.63 | 0.63 | 0.63 | 0.63 | |
Cooling water pressure (mpa) | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
Control form | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
Overall dimension of main machine | Length (mm) | 12000 | 1000 | 10000 | 10000 | 8500 | 10000 | 8000 | 5700 | 5700 | 4000 |
Width (mm ) | 2900 | 2740 | 2660 | 2560 | 2980 | 2400 | 2400 | 2350 | 1800 | 2050 | |
Height ( mm ) | 3930 | 3660 | 4120 | 3520 | 3325 | 3580 | 3880 | 4170 | 3305 | 2795 |
B (Bag O matic) type double mould tyre shaping and curing press is suitable for the vulcanization of all-steel heavy-duty radial tyre, semi-radial tyre and nylon bias tyre with one set of additional post curing inflator.
Sizes of the machine: LL-B1145X2, LL-B1310X2,
LL-B1525X2, LL-B1640X2
MODEL |
LL-B1640X2 |
LL-B1525X2 |
LL-B1310X2 |
LL-B1220X2 |
LL-B1145X2 |
LL-B1050X2 |
Steam dome specifications |
(65.5'') 1640mm |
(63.5'') |
(55'') |
(48'') |
(45'') |
(42'') |
1525mm |
1310mm |
1220mm |
1145mm |
1050 |
||
Max. mould closing force |
4450X2KN |
4220X2KN |
2890X2KN |
1920X2KN |
1720X2KN |
1320X2KN |
Height of mould |
254-622mm |
254-635mm |
245-445mm |
305-505mm |
230-455mm |
180-300mm |
Power of main motor |
16Kw |
13Kw |
13Kw |
11 Kw |
11 Kw |
11 Kw |
Apply bead specifications |
19''-24.5'' |
18''-24.5'' |
16''-20'' |
13''-20'' |
12-17.5'' |
12''-16'' |
Notes |
It works for the vulcanization of TBR, PCR tires or bias tires. If it works for curing the bias tires, the press will match with post curing inflator. If it works for curing the radial tires, the press will match with segmented mould controller |
|||||
1. The belt ply servicer uses a servo system control, reallized and initiative and stretch-free material servicing, automtic length setting and cutting as well as synchronous plying up.
2. The clamp transfer ring unit moves smoothly, with accurate and reliable positioning, able to reallize the automatic tire unloading after stitching(which has to be used in cooperation with the collapsible drum)
3. Several different types of shaping drums enable the clients with much greater selection sapce, including inner clips and collapsible shaping drums.
4. The automatic distance variable laser positioning indicator projector offers a higher precision, reliability, simplicity, convenience and applicability.
Applicable Rim Diameter | φ14’’~ φ17’’ |
Building Drum Width | 260~600mm |
Height from Mandrel Center to Floor | 900mm |
Building Drum Diameter | φ390 ~ φ465mm |
Type of Assistant Drum | Radial Extension Mode |
Control System | PLC&AC-Servo Converter and Position Interface |
Power and Voltage | AC380V±10% 50Hz |
Air Pressure | ≥0.7Mpa |
1. The high process is accuracy of the mechanical parts ensure the excellent mechanical performance and precision of the whole machine
2. An AC servo motor drive is used for main machine building drum, made the splicing of various tire carcass components distributed evenly and positioning accurately and obtained optimized tire uniformity.
3. The finger type trun down and bladder trun-up devices fully ensure the building quality of the tyres.
4. The component services are well structured, satisfied the different production process requirements. The inner liner and tire body fabric plies are initiatively fed by the belt conveyor, effectively controlled the stretch of the semi-finished components; And the large roll sidewall servicing and automatic length setting and cutting of the inner liners and sidewalls increase the productivity and green tire quality.
5. The automatic distance variable laser positioning indicator projector offers higher precision, reliability, simplicity, convenience and applicability.
Applicable Rim Diameter |
φ 14’ ’ ~φ 17’ ’ |
Bead Clip Ring Width Adjustable Range |
130mm~600mm |
Height from Mandrel Center to Floor |
920mm |
Assistant Drum Diameter |
φ 480mm~φ 780mm |
Type of Assistant Drum |
Radial Extension Mode |
Control System |
PLC& AC-Servo Converter and Position Interface |
Power and Voltage |
AC380V± 10% 50Hz |
Air Pressure |
≥ 0.7Mpa |
We are one of the biggest manufacturers of rubber machinery in China. All steel radial tyre single stage building machine is used to build all kinds of all steel load-duty radial tyre. It is the advanced combination of mechanism, electricity and pneumatic system.
Building Tyre Bead Edge Margin Diameter | 17.5’’ ~24.5’’ |
Min. Outside- Dia. Of Shaped Green Tyre | 740mm |
Max.Outside- Dia. Of Shaped Green Tyre | 1230mm |
Tire Type | 7R17.5~12.00R24 |
Belt Ply Up Drum | 860~1040~1150mm |
Belt Ply Up Drum Width | 450mm |
Assistant Drum Speed | Max33r/m |
Building Drum Speed | Max 150r/m |
Function: The building machine works for building all steel radial heavy duty tires from 7R17.5-12R24.
Bead diameter: | 17.5 inch -24.5 inch |
Standard accessory drum diameter: | 850-1100-1210 mm |
Standard accessory drum width: | 450 mm |
Max. Clamping diameter of transfer loop: | 1250 mm |
Transferring ring sector radial stroke: | 75 mm |
Min outside diameter of green tire (including tire tread): | 740mm |
Max outside diameter of green tire(incl. Tire tread): | 1230mm |
Drum shoulder stroke: | 320 mm |
Zero degree belt ply width: | 25-60 mm |
Innerliner width: | Max 950 mm |
Steel fabric width: | Max1100mm |
Chafer width: | Max 180 mm |
Chafer adjust range: | Inside gap 380-1100mm |
Tire sidewall width: | Max 400 mm |
Tire sidewall adjust range: | Inside pitch 400-1460 mm |
Apex width: | Max 160mm |
Min inside gap /Max outside gap of apex: | 38-450 mm |
Tread width: | 160-400 mm |
Max length of tread: | 4000 mm |
A. C. Power | AC380V, 50Hz, 3 phrase, 28Kw |
Compressed air: | 0.7Mpa |