This machine is designed to produce the 8-folding (Star-sealed) garbags on roll and t-shirt bags on roll automatically.
Features:
1. Computer control
2. Both-side of heating the bags so as to seal the thick bags strongly.
3. Two-line to produce the bags with high speed.
4. Inverter to control the main motor and save the electricity.
5. Equipped with servo motor
6. Auto pneumatic cylinder to control the rubber press cylinders.
7. Independent auto coreless changer device
8. Auto counter and auto alarm
Main technical parameters:
Max. Width of bag: 400mm
Min. Width of bag: 50mm
Max. Length of bag: 1200mm
Min. Length of bag: 20mm
Materials to be used: HDPE/LDPE
Sealing thickness: 0.024-0.380mm
The kinds of bag making: Color printing bag and white bags
Output capacity: 40-160PCS/min *2 lines
Bag making methods: Rolled T-shirt bag and Rolled 8 folding garbage bag
Total power: 8kw
Dimension(L*W*H): 5000mm*1850mm*1800mm
Weight: 2250kg
]]>PE/PP Film Plastic Rcycling Machine is make the wasted PP/PE film into pellets by water-ring cutting device and by single machine double gas pressing method including water case, beating pellets machine etc. It can be used for granulate plastics such as PP, PE etc plastic block materials, by mean of its exhaust system that machine exhaust the gas from the heated material thus making the grains saturant and solid.
* Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
* Gear box: Surface heat quenching and tempering /auto. Oil lubricated
* Force feeder device
* Automatic temperature controlling system
* The extruder is cooled by blower automatically.
* The main motor and motor of cutter are adjustable in speed.
* Including water-cooling device made of stainless steel
* Including granule cutter
* Drying blower
]]>Raw Material: HDPE/LDPE/LLDPE
Extruder
Max. Folding Width of film: 1500mm
Main motor power: 37kw(HF Inverter motor)
Heating power: 25kw
Diameter of die: 80mm
L/D ratio of screw: 28: 1
Speed of screw: 5-100rpm
Barrel cooling: 1/6 HP blower*3
Film thickness: 0.008-0.12mm
Output capacity: 85kg/h
Screen filter: Mechanical screen changer
Gear Box: 3 Axis, Steel Nitride Harden Gears with Oil lubrication pump.
Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
Rotary-die head
HDPE inflation die: 150, 300mm diameter
Cooling air blower: 3kw
Aluminium Alloy x 1 set (6 air inlet hose)
Take up unit
Fixed roller: 1700mm
Take up rollers: 165mm diameter*1700mm(L)
Take up motor: 1.5KW AC motor(HF Inverter control)
Guide rollers: 115mm diameter*1700mm(L)
Equipped with gusset device
Wooden plank bubble supports
Take off speed: 5-100m/min
Pressing rollers controlled by Pneumatic cylinders.
Back to back double winding station
Winding motor: 2.2kw (2.2kw HF Inverter control)*3 sets
Friction metal roller: 380mm diameter*1700mm(L)
Manual bobbin changing and cutting
Expansion rubber arc roller: 2 PCS
Cutting knife: 5PCS
Trim blowing device: 1set
Air shafts: 4PCS
Control cabinet
1). Temperature of screw automatically controlled (4 zones)
2). Independent switches controls including amp, rpm and m/min meters for the whole machine.
Dimension
Dimension (L*W*H): 8000mm*3800mm*6500mm
Weight
About 4500kg
Including
1). Rotary die heads
2). 1700mm rollers with Pneumatic open and closing AC driven
3). With manual cutting and rolling changeover
4). Air compressor
5). Lip air ring
6). Heating switches, Moment motor controlling box
7). Heating loop
8). AC electromagnetic contactor
]]>Raw Material: HDPE/LDPE/LLDPE
Extruder
Max. Folding Width of film: 3000mm
Main motor power: 110kw(Inverter control)
Heating power: 60kw
Diameter of die: 120mm
L/D ratio of screw: 28: 1
Speed of screw: 5-100rpm
Barrel cooling: 1/6 HP blower*4
Film thickness: 0.008-0.20mm
Output capacity: 180-220kg/h
Screen filter: Mechanical screen changer
Gear Box: 3 Axis, Steel Nitride Harden Gears with Oil lubrication pump.
Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
Rotary-die head
Inflation die: 300, 700mm diameter
Cooling air blower: 5kw
Aluminium Alloy x 1 set (6 air inlet hose)
Take up unit
Fixed roller: 3200mm
Take up rollers: 165mm diameter*3200mm(L)
Take up motor: 3KW AC motor with gear reducer
Guide rollers: 115mm diameter*3200mm(L)
Wooden plank bubble supports
Take off speed: 5-100m/min
Pressing rollers controlled by Pneumatic cylinders.
Back to back double winding station
Winding motor: 3kw AC motor controlled by HF Inverter *3 sets
Friction metal roller: 380mm diameter*3200mm(L)
Manual bobbin changing and cutting
Expansion rubber roller: 2 PCS
Air shafts: 4PCS
Cutting knife: 5PCS
Trim blowing device: 1set
Control cabinet
1). Temperature of screw automatically controlled (8 zones)
2). Independent switches controls including amp, rpm and m/min meters for the whole machine.
Dimension
Dimension (L*W*H): 8800mm*4800mm*11500mm
Weight
About 12500kg
Including
1). Rotary die heads
2). 3200mm rollers with Pneumatic open and closing AC driven
3). With manual cutting and rolling changeover
4). Air compressor
5). Lip air ring
6). Heating switches, Moment motor controlling box
7). Heating loop
8). AC electromagnetic contactor
]]>Raw Material: HDPE/LDPE/LLDPE
Extruder
Max. Folding Width of film: 1500mm
Main motor power: 37kw(HF Inverter motor)
Heating power: 25kw
Diameter of die: 80mm
L/D ratio of screw: 28: 1
Speed of screw: 5-100rpm
Barrel cooling: 1/6 HP blower*3
Film thickness: 0.008-0.12mm
Output capacity: 85kg/h
Screen filter: Mechanical screen changer
Gear Box: 3 Axis, Steel Nitride Harden Gears with Oil lubrication pump.
Material of screw and barrel: Alloyed high-quality steel 38CrMoAlA with optimum hardness and strong corrosion resistance after precision finishing and nitrogen treatment
Rotary-die head
HDPE inflation die: 150, 300mm diameter
Cooling air blower: 3kw
Aluminium Alloy x 1 set (6 air inlet hose)
Take up unit
Fixed roller: 1700mm
Take up rollers: 165mm diameter*1700mm(L)
Take up motor: 1.5KW AC motor(HF Inverter control)
Guide rollers: 115mm diameter*1700mm(L)
Equipped with gusset device
Wooden plank bubble supports
Take off speed: 5-100m/min
Pressing rollers controlled by Pneumatic cylinders.
Back to back double winding station
Winding motor: 2.2kw (2.2kw HF Inverter control)*3 sets
Friction metal roller: 380mm diameter*1700mm(L)
Manual bobbin changing and cutting
Expansion rubber arc roller: 2 PCS
Cutting knife: 5PCS
Trim blowing device: 1set
Air shafts: 4PCS
Control cabinet
1). Temperature of screw automatically controlled (4 zones)
2). Independent switches controls including amp, rpm and m/min meters for the whole machine.
Dimension
Dimension (L*W*H): 8000mm*3800mm*6500mm
Weight
About 4500kg
Including
1). Rotary die heads
2). 1700mm rollers with Pneumatic open and closing AC driven
3). With manual cutting and rolling changeover
4). Air compressor
5). Lip air ring
6). Heating switches, Moment motor controlling box
7). Heating loop
8). AC electromagnetic contactor
etc.
]]>