Hot medium liquid: Water or oil convertibly

Either water or oil can be used as a hot medium liquid according to the needs of mold forming temperature. Its high selectivity is certain to bring in high economic efficiency,

-Vertical pump

The flow of vertical pump can be always kept steady and its service life keeps long.

-Stainless medium tank

This interior tank will not get rust for long term, which is sure to prevent from any blockade of pipes and keep long-term service of pump.

-Transparent water [oil] level viewer

The transparent water [oil] level viewer can easily be used to view and inspect the quantity of medium liquid and be reminded to refill the medium liquid from time to time.

-Automatic alarming device

While water [oil] shortage occurs in the container, this device will automatically light up and start alarming and cut off the electric power of heaters and pumps, thus to guarantee their safety.

-High-precision automatic temperature control

The measure of temperature is very sensitive and accurate, little change of temperature helps to keep products both fine and delicate,

-Minimize products wastage

The mold can reach the required temperature right at the beginning of operation, thus can obviously minimize products shortage. Maintain proper temperature

-Either in continuous operation or in temporary shutting down, moldforming temperature can always be kept proper to guarantee the best quality of products and further improve the forming process.

-Compact in size, light in weight

The display screen shows re-producing temperature setting and actual temperature

The dew point of dride wind hit -50C degree

Main power switch with mechanical interlock function

The dehumidification system adopts double cooler structure, can guarantee very low return wind temperature and dew point

Compressor is used “COPELAND” brand which made in the USA. The inside safety protection can guarantee the long lasting of the chiller well. The pump is used made in Taiwan and all parts of cooling system are imported from the USA, Mexico. Denmark and Japan.

Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained. Equipped with automatic water supply device in the water- tank. Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.

Larger than model XC-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste.

Complete with safety protection and error indication system, including compressor over load protection, pump over load protection, high pressure and low pressure protection and phase failure protection,

Equipped with figure intellectualized temperature controls, which can accurately measure and control water temperature within the range of 5C-35C.

Applied Machinery: Cooling system of oil temperature, ultrasonic, high frequency machinery. Cooling

System of injection molding machinery. Cooling system of blow molding machinery. Cooling system of extruder.

Additional equipment for option: 1. Starter of timer switch. 2. Large type of water filter. 3. Protection switch for prove the electric leakage. 4. Cooling tower and pump.

Compressor is used “COPELAND” brand which made in the USA. The inside safety protection can guarantee the long lasting of the chiller well. The pump is used made in Taiwan and all parts of cooling system are imported from the USA, Mexico. Denmark and Japan.

Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained. Equipped with automatic water supply device in the water- tank. Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.

Larger than model XC-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste.

Complete with safety protection and error indication system, including compressor over load protection, pump over load protection, high pressure and low pressure protection and phase failure protection,

Air cooled chiller

Equipped with figure intellectualized temperature controls, which can accurately measure and control water temperature within the range of 5C-35C.

Applied Machinery: Cooling system of oil temperature, ultrasonic, high frequency machinery. Cooling

System of injection molding machinery. Cooling system of blow molding machinery. Cooling system of extruder.

Additional equipment for option: 1. Starter of timer switch. 2. Large type of water filter. 3. Protection switch for prove the electric leakage. 4. Cooling tower and pump.

1) Capacity: 12kg – 1, 000kg

2) Good heat distribution

3) Precise temperature controls

4) Save time and manpower

5) Reliable design

6) Standard voltage: 380V 50Hz 3 Phase

Features: Claw-shape blade bed system can disperses the pressure and therefore it is good to be used to crushing hard and raw material.

The knife tool is refined with imported special tool-steel, the clearance between knife tools are adjustable, when it becomes blunt by using, it can be dismounted repeatedly, it is durable.

Use high-intensity steel screws to fasten the knife leaf and knife seat, having strong bearing capacity.

All walls of crushing chamber are treated by sound-proof, so having extra-low noise.

A discount-type designed, the bunker, main body, screen can be dismounted for cleaning easily.

The electric motor has over-loading protection with power source interlock protection device. Double-safety protection for operators and electric motor.

Step-type motion knife design with strong breaking capacity.