BRIEF INDRODUCTION:
Contact Heat Thermoformer with Big Forming area of 760mm*540mm, Producing clamshell packages as well as trays, disposable containers from polymers BOPS PS PVC PET and HIPS
SPECIFICATION:
Area Forming:
760mm*540mm/770mm*580mm (LX3021)
Forming Depth: 120mm/125mm
DESIGN FEATURE *THE VIDEO IS AVAILABLE
Automatic stacking system with robot arm for parts with any shape
Quick tool change (smart baffle plate system)
Programmable PLC and touch screen control
Components from multi-national suppliers assures a reliability and worldwide compatibility
Forming, trimming, stacking and counting in one operation
Special heating system ensures an extra Clarity and Sparkle for formed parts
Precise index accuracy utilizing Computerized AC servo drive system
Electric pre-heater and independently operated multi-zone plate-heating system
Perfect cut plate and Strong double toggle system (under or above cut plate)
Low air and energy consumption and low Space floor requirements and minimum labor cost
In-mould ensuring consistent and accurate trim
CUSTOMER BENEFITS
Cut-in-mould technology saves plastic material greatly and ensures a superior product quality
Low air consumption of 650 liters /min and low power consumption of 8kw saves energy greatly
With our smart baffle system only 2 minutes is required to change baffle plate, saving set up time
High automatization of machine saves the labor cost greatly.
High quality of Components from multi-national suppliers assures a high reliability of machine
Low cost and high reliability is the most important benefits from our machine
]]>
Main Motor with Frequency Drive
Chrome-faced Polishing Roll Stack with Frequency Drive
Haul-off unit with Frequency Drive
Hydraulic screen changer with Double performance Station
Hydraulic pump included?
Double Winding Unit included
Water Heating Control unit included
Side trim winder
Specification
Output 135 kg/hour
Production PP, PS, HIPS sheet
Sheet Width 680 Max.
Thickness Range 0.3-2.0mm
Power Supply 3-N AC380V ,50Hz
Total Power 100kw (Approximate)
]]>
BRIEF INDRODUCTION:
Contact Heat Thermoformer with Big Forming area of 760mm*540mm, Producing clamshell packages as well as trays, disposable containers from polymers BOPS PS PVC PET and HIPS
SPECIFICATION:
Area Forming:
760mm*540mm/770mm*580mm (LX3021)
Forming Depth: 120mm/125mm
DESIGN FEATURE *THE VIDEO IS AVAILABLE
Automatic stacking system with robot arm for parts with any shape
Quick tool change (smart baffle plate system)
Programmable PLC and touch screen control
Components from multi-national suppliers assures a reliability and worldwide compatibility
Forming, trimming, stacking and counting in one operation
Special heating system ensures an extra Clarity and Sparkle for formed parts
Precise index accuracy utilizing Computerized AC servo drive system
Electric pre-heater and independently operated multi-zone plate-heating system
Perfect cut plate and Strong double toggle system (under or above cut plate)
Low air and energy consumption and low Space floor requirements and minimum labor cost
In-mould ensuring consistent and accurate trim
CUSTOMER BENEFITS
Cut-in-mould technology saves plastic material greatly and ensures a superior product quality
Low air consumption of 650 liters /min and low power consumption of 8kw saves energy greatly
With our smart baffle system only 2 minutes is required to change baffle plate, saving set up time
High automatization of machine saves the labor cost greatly.
High quality of Components from multi-national suppliers assures a high reliability of machine
Low cost and high reliability is the most important benefits from our machine
]]>
BRIEF INDRODUCTION:
Contact Heat Thermoformer with Big Forming area of 760mm*540mm, Producing clamshell packages as well as trays, disposable containers from polymers BOPS PS PVC PET and HIPS
SPECIFICATION:
Area Forming:
760mm*540mm/770mm*580mm (LX3021)
Forming Depth: 120mm/125mm
DESIGN FEATURE *THE VIDEO IS AVAILABLE
Automatic stacking system with robot arm for parts with any shape
Quick tool change (smart baffle plate system)
Forming Press drivend by servo motor minimizes power consumption. And No air pressure is required on forming press.
Servo Press makes cutting force much stronger, more reliable and controllable compared to other cylinder driven machine.
Programmable PLC and touch screen control
Components from multi-national suppliers assures a reliability and worldwide compatibility
Forming, trimming, stacking and counting in one operation
Special heating system ensures an extra Clarity and Sparkle for formed parts
Precise index accuracy utilizing Computerized AC servo drive system
Electric pre-heater and independently operated multi-zone plate-heating system
Perfect cut plate and Strong double toggle system (under or above cut plate)
Low air and energy consumption and low Space floor requirements and minimum labor cost
In-mould ensuring consistent and accurate trim
CUSTOMER BENEFITS
Forming Press drivend by servo motor minimizes power consumption. And No air pressure is required on forming press.
Servo Press makes cutting force much stronger, more reliable and controllable compared to other cylinder driven machine.
Cut-in-mould technology saves plastic material greatly and ensures a superior product quality
Low air consumption of 650 liters /min and low power consumption of 8kw saves energy greatly
With our smart baffle system only 2 minutes is required to change baffle plate, saving set up time
High automatization of machine saves the labor cost greatly.
High quality of Components from multi-national suppliers assures a high reliability of machine
Low cost and high reliability is the most important benefits from our machine
]]>
LX 700 thermoforming machine produces Disposable cups, containers, and lids etc completely automatically with forming, cutting, stacking, counting and conveying in one machine.
Take advantage of Tilting Movement of the Forming table, destacking from mould.
Servo Plug assist reduces minimizing energy use on press and saving time of adjustment.
Reliable Germany 4 Cam System, driven by Frequency inverter saving energy.
Two Different speeds can be set and performed in the very same cycle for better quality of finished product.
Two Edge heating zones and oven can move forwards and backwards.
Touch screen and programmable PLC control
Precise index accuracy utilizing Servo drive system, minimizing plastic scrap.
Retractable, independently operated upper and lower ovens.
Module temperature control ensures precise temperature accuracy and easy operation.
Accessing to all digitalized functions by pressing touch screen.
Highly automatic stacking and counting system
Automatic central lubrication
Cam-controlled drive technology ensures 100% precise repetition of each cycle
Highly stressed parts are of very robust design, with lower table and frames made of casting.
Little maintenance effort required and long intervals between maintenances
Most of Components are from multi-national suppliers assures a reliability and worldwide compatibility.
CONFIGURATION
Loading unit Tilt-mold thermofroming unit
Stacking and Counting unit Scrap rewinding unit
Travaling crane Servo plug assist
Servo Index Servo Press (for LX700 servo type )
Servo Tilting (for LX700 servo type ) Edge heating zones
Suitable material: PP PS PET PVC
Forming Area: 260x680mm maximum
Dry Run Speed: 30cycles/min Max.
]]>
LX 700 tilt-mold thermoforming machine(tilting mould cup forming machine) produces Disposable cups, containers, and lids etc completely automatically with forming, cutting, stacking, counting in one operation cycle.
Design Feature
Take advantage of Tilting Movement of the Forming table, destacking from mould.
Servo Plug assist reduces minimizing energy use on press and saving time of adjustment.
Reliable Germany 4 Cam System, driven by Frequency inverter saving energy .
Two Different speeds can be set and performed in the very same cycle for better quality of finished product.
Two Edge heating zones and oven can move forwards and backwards .
Touch screen and programmable PLC control.
Precise index accuracy utilizing Servo drive system, minimizing plastic scrap.
Retractable, independently operated upper and lower ovens.
Module temperature control ensures precise temperature accuracy and easy operation.
Accessing to all digitalized functions by pressing touch screen.
Highly automatic stacking and counting system
Automatic central lubrication.
Cam-controlled drive technology ensures 100% precise repetition of each cycle.
Highly stressed parts are of very robust design ,with lower table and frames made of casting.
Little maintenance effort required and long intervals between maintenances.
Most of Components are from multi-national suppliers assures a reliability and worldwide compatibility.
CONFIGURATION
Loading unit
Tilt-mold thermofroming unit
Stacking and Counting unit
Scrap rewinding unit
Travaling crane
Servo plug assist
Servo Index
Servo Press (for LX700 servo type )
Servo Tilting (for LX700 servo type )
Edge heating zones
Suitable material: PP PS PET PVC
Forming Area: 260x680mm maximum
Dry Run Speed: 20-30cycles/min
]]>
Design Feature of Thermoforming forming machine for lid, trays,
Containers.
Automatic Solution for Disposable packaging with any shapes completely automatically with forming, cutting, stacking and counting and punching holes in line.
Punching holes in line (option).
Cam-controlled Cutting station with servo motor drive or frequency inverter.
Cam-controlled Forming station with Servo motor drive or frequency inverter.
Precise index accuracy utilizing Servo drive system, minimizing plastic scrap.
Positive forming and Negitive forming.
Servo drive Stacking system.
Touch screen and programmable PLC control.
Module temperature control ensures precise temperature accuracy and easy operation or temperture controllers.
Automatic lubrication or centor oiling.
Little maintenance effort required and long intervals between maintenances.
Most of Components are from multi-national suppliers assures a reliability and worldwide compatibility.
Forming area: 760*530mm and 620*210mm
Positve Forming: 100mm
Negitive Forming: 100mm or50mm
Speed; 15-20 cycles/min
Pressure forming machines
Thermoforming machinery
Thermoforming equipment
]]>