RCGF32-32-10 3in1unit Juice Tea Filling Machine integrates washing, filling, capping into one unit, It is applied to fill hot frult juice. Tea and other beverage into thermal proof PET bottle by changing few parts. This equipment can realize to asepsis filling as it equipped with constant temperature controlling system.
PRIMARY FEATURES
1)The suspending bottle-neck clamping design make the bottle stable during the high-speed moving conditions, by changing a few parts, it can meet for the need of production of different types of bottle easily.
2)The new generation of stainless steel grab is adopted and the grabs have no contact with the area above the bottle’s screw thread, Nozzles in the grab guarantee the complete wash of the interior of the bottle.
3)The advanced micro negative-pressure filling technology used in this machine makes the filling quick, steady and accurate, the beverage-holding tank is fully-closed and also, temperature-control device and OIP washing interface are installed.
4)This machine can meet all the technical requirements for hot-filling below 9centi degree, the before capping, bottle-mouth will be cleaned by RO, washing device.
5)Magnetic torque is used for screw capping, and the power of screw capping can be adjusted steplessly, capping is reliable and do no harm to the cap.
6)Advanced technologies, such as human-machine interface touch-screen and PLC computer program control are adopted in this machine.
7)All parts that have direct contact with the beverages are made of high quality stainless steel, and many critical components, such as the decelerator, the motor, are from famous international companies.
|
Model |
RCGF32-32-10 |
|
Production Capacity (500ml)(BPH) |
12000-15000 |
|
Filling Precision |
1%(Liquid Level) |
|
Polyester Bottle Standard (mm) |
Bottle Diameter:φ50-φ100;Height:150-310 |
|
suitable cap shape |
Plastic Screw Cap |
|
Water Pressure Of Washing Bottle (MPa) |
0.2-0.25 |
|
Wash Bottle Consumption Water (Kg/h) |
2400 |
|
Spraying Position |
12 |
|
Dripping Bottle Position |
7 |
|
Gas Source Pressure(MPa) |
0.6 |
|
Gas Consumption (m3/min) |
0.5 |
|
Power(kw) |
5.6 |
|
Weight(kg) |
6000 |
|
Dimension (LxWxH)(m) |
4.00×2.20×2.50 |
DCGF32-32-10 3in1unit Carbonated Drink Filling Machine is used in production of polyester bottle-packing carbonate drink, such as Coca cola, Pepsi-cola, Sprite drink etc. It can carry out washing bottle, filling and capping of one machine. The whole machine designing is reasonable. The appearance is beautiful and the maintenance is convenient. It adopts hanging type conveying-bottle structure to make changing bottle model more convenient, faster and more easy. The main machine adopts advanced PLC control technology. The key electric elements are adopt international famous products.
|
Model |
DCGF32-32-10 |
|
Production Capacity(BPH) |
8000-10000 |
|
Filling precision |
≤+5mm Liquid Level |
|
Fills installs the pressure (MPa) |
≤0.4 |
|
Bottle specification(mm) |
Bottle Diameter:φ50-φ100; Height:150-310 |
|
Suitable cap Shape |
Plastic Screw Cap |
|
Total output (kw) |
6.2 |
|
Weight (kg) |
6000 |
|
Overall dimensions(mm) |
4000x2200x2500 |
CGF32-32-10 3in1Unit Water Wine Filling Machine is a kind of professional filling machine integrator for no-gassy beverage. It is multifunctional which can be used for washing, filling and capping. It is a kind of advanced filling machine integrator which is innovated in following the process requirements of filling Pure water, Mineral water, wine and etc based on the importing and assimilating the foreign advanced technology.
PRIMARY FEATURES
1. There are some features such as compact conformation, good shape, cozy operation, excellent automatic and poor labor intensity.
2. We adopt air conveyor bottle-feeding technology instead of the feeding screw and conveyer chain. Easily change the bottle change over parts.
3. It adopts the blocking bottleneck technology to convey bottles. It does not adjust the height of equipment when the type of bottle is exchanged. According to the diameter of bottle, you could exchange corresponding nylon elements such as arc slipper guide, thumb wheel etc.
|
Model |
CGF32-32-10 |
|
Production Capacity (500ml)(BPH) |
10000-12000 |
|
Filler Valves |
32 |
|
Rinser Grippers |
32 |
|
Capper Header |
10 |
|
Suitable Bottle Shape |
circular or square |
|
Bottle Diameter (mm) |
φ50-φ90 |
|
Bottle Height(mm) |
150-310 |
|
Compressed Air Pressure(MPa) |
0.3-0.7 |
|
Washing Medium |
aseptic water |
|
Washing Water's Pressure(MPa) |
0.25 |
|
Total Power Supply KW |
6.2 |
|
Overall Dimensions(m) |
4.00×2.20×2.50 |
|
Weight(kg) |
6000 |
The machine is applicable for taking off steel rings from tyre.
Structure feature:
The machine is equipped with safety shelves to effectively prevent unsafe factor from the processing of taking off the steel wire.
The motor, the retarder and the main frame are all compactly assemble together as one body.
The base of the machine is a complete cast framework, which is convenient for installation.
Technical parameter:
1. Capacity: 40~60tires/H.
2. Motor power: 15Kw.
3. Overall size: 2470*1690*1490mm.
4. Weight: 6500Kg
]]>
Features:
1. Feed the whole tire into the machine, no need to cut it into small pieces.
2. To asunder the steel wire auotmat
Technical Features of Waste Tire Recycling Machinery:
1. Tire Cutter: To cut off the inner steel rings of tires.
2. Tire Crusher: To crush tires into blocks of 500mm or so. Crushed blocks are sent back to the crushing room through a filter system for re-crushing. Standard blocks will be filtered through round wire mesh during the process.
3. Intermediate Rubber Crusher: To smash rubber blocks into rubber granules with size from 5 to 10 meshes.
4. Magnetic Selector: To separate steel wire from the rubber grains. Rubber granules under normal temperature.
5. Fine Rubber Crusher: To smash 6-12mm rubber granules into 1-3mm rubber granules under normal temperature.
6. Double–grinding-pan Rubber Grinder: To grind 5-10 mesh rubber granules into 40-120 mesh rubber powder.
7. Air-current Sorting Machine: To create air eddy and separate rubber granules and the nylon fiber then to sort the rubber powder into two kinds: Rough fine ones ranging from 40-120 meshes.
8. Quantified Bag Filler: To fill rubber powder into the bag according to customer need.
Application:
The plant is applied to recycling of waste tire. It works efficiently, energy-saved, lowering labour. It was exported to Indonesia, Russia and Vietnam, etc…
]]>
Structural Features:
Hard alloy is welded on the cutting blade to make it rigid and wearable.
The machine is equipped with safety shelves to effetively prevent unsafe factor from the processing of pulling the steel wire. The motor, the retarder and the main frame are all compactly assemble together as one body. The base of the machineis a complete cast framework, which is convenient for installation.
]]>
This machine for cutting whole tire to 50*50mm rubber block.
This machine has the compact structure, advanced technology, low power consumption, high eficiency, crushing room with folio structure, easy to maintain, etc. The machine adopts hard alloy steel as its blade, high rigidity and wearble, repeating and wearable, repeating repair use polong use life. Circle mesh screen is steel is steel gridding structure, big area for material dropping is good for production of eligible rubber materail. The oversize types should be cutted before crushing.
Technical Parameter:
1. The size of raw material: ≤ 800whole type.
2. The size of finished material: 50*50 mm.
3. Capacity: 1~1500Kg/h.
4. Main motor: 48Kw.
5. Overall Size: 2450*2140*2490mm
6. Weight: 4800Kg.
]]>
Feature:
This machine has the compact structure, advanced technology, low power consumption, high eficiency, crushing room with folio structure, easy to maintain, etc.
]]>